lkml.org 
[lkml]   [2019]   [Jul]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH] drm/atmel-hlcdc: set layer REP bit to enable replication logic
Hi Joshua.

On Tue, Jul 09, 2019 at 04:24:49PM +0000, Nicolas.Ferre@microchip.com wrote:
> On 09/07/2019 at 17:35, Joshua Henderson wrote:
> > This bit enables replication logic to expand an RGB color less than 24
> > bits, to 24 bits, which is used internally for all formats. Otherwise,
> > the least significant bits are always set to zero and the color may not
> > be what is expected.
> >
> > Signed-off-by: Joshua Henderson <joshua.henderson@microchip.com>
>
> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
>
> Here is patchwork entry:
> https://patchwork.kernel.org/patch/11037167/
>
> Thanks, best regards,
> Nicolas
>
> > ---
> > drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c | 2 +-
> > 1 file changed, 1 insertion(+), 1 deletion(-)
> >
> > diff --git a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c
> > index eb7c4cf..6f6cf61 100644
> > --- a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c
> > +++ b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c
> > @@ -389,7 +389,7 @@ atmel_hlcdc_plane_update_general_settings(struct atmel_hlcdc_plane *plane,
> > atmel_hlcdc_layer_write_cfg(&plane->layer, ATMEL_HLCDC_LAYER_DMA_CFG,
> > cfg);
> >
> > - cfg = ATMEL_HLCDC_LAYER_DMA;
> > + cfg = ATMEL_HLCDC_LAYER_DMA | ATMEL_HLCDC_LAYER_REP;
> >
> > if (plane->base.type != DRM_PLANE_TYPE_PRIMARY) {
> > cfg |= ATMEL_HLCDC_LAYER_OVR | ATMEL_HLCDC_LAYER_ITER2BL |

Thanks - this gave me an opportunity to read a bit more in the datasheet
of the controller.
Applied to drm-misc-next with Ack from Nicolas.

Sam

\
 
 \ /
  Last update: 2019-07-12 18:22    [W:0.786 / U:0.004 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site