lkml.org 
[lkml]   [2019]   [Jul]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 5.2 60/61] staging: bcm2835-camera: Handle empty EOS buffers whilst streaming
Date
From: Dave Stevenson <dave.stevenson@raspberrypi.org>

commit a26be06d6d96c10a9ab005e99d93fbb5d3babd98 upstream.

The change to mapping V4L2 to MMAL buffers 1:1 didn't handle
the condition we get with raw pixel buffers (eg YUV and RGB)
direct from the camera's stills port. That sends the pixel buffer
and then an empty buffer with the EOS flag set. The EOS buffer
wasn't handled and returned an error up the stack.

Handle the condition correctly by returning it to the component
if streaming, or returning with an error if stopping streaming.

Fixes: 938416707071 ("staging: bcm2835-camera: Remove V4L2/MMAL buffer remapping")
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.org>
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Acked-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c | 21 +++++-----
drivers/staging/vc04_services/bcm2835-camera/mmal-vchiq.c | 5 +-
2 files changed, 15 insertions(+), 11 deletions(-)

--- a/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c
+++ b/drivers/staging/vc04_services/bcm2835-camera/bcm2835-camera.c
@@ -336,16 +336,13 @@ static void buffer_cb(struct vchiq_mmal_
return;
} else if (length == 0) {
/* stream ended */
- if (buf) {
- /* this should only ever happen if the port is
- * disabled and there are buffers still queued
+ if (dev->capture.frame_count) {
+ /* empty buffer whilst capturing - expected to be an
+ * EOS, so grab another frame
*/
- vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_ERROR);
- pr_debug("Empty buffer");
- } else if (dev->capture.frame_count) {
- /* grab another frame */
if (is_capturing(dev)) {
- pr_debug("Grab another frame");
+ v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev,
+ "Grab another frame");
vchiq_mmal_port_parameter_set(
instance,
dev->capture.camera_port,
@@ -353,8 +350,14 @@ static void buffer_cb(struct vchiq_mmal_
&dev->capture.frame_count,
sizeof(dev->capture.frame_count));
}
+ if (vchiq_mmal_submit_buffer(instance, port, buf))
+ v4l2_dbg(1, bcm2835_v4l2_debug, &dev->v4l2_dev,
+ "Failed to return EOS buffer");
} else {
- /* signal frame completion */
+ /* stopping streaming.
+ * return buffer, and signal frame completion
+ */
+ vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_ERROR);
complete(&dev->capture.frame_cmplt);
}
} else {
--- a/drivers/staging/vc04_services/bcm2835-camera/mmal-vchiq.c
+++ b/drivers/staging/vc04_services/bcm2835-camera/mmal-vchiq.c
@@ -290,8 +290,6 @@ static int bulk_receive(struct vchiq_mma

/* store length */
msg_context->u.bulk.buffer_used = rd_len;
- msg_context->u.bulk.mmal_flags =
- msg->u.buffer_from_host.buffer_header.flags;
msg_context->u.bulk.dts = msg->u.buffer_from_host.buffer_header.dts;
msg_context->u.bulk.pts = msg->u.buffer_from_host.buffer_header.pts;

@@ -452,6 +450,9 @@ static void buffer_to_host_cb(struct vch
return;
}

+ msg_context->u.bulk.mmal_flags =
+ msg->u.buffer_from_host.buffer_header.flags;
+
if (msg->h.status != MMAL_MSG_STATUS_SUCCESS) {
/* message reception had an error */
pr_warn("error %d in reply\n", msg->h.status);

\
 
 \ /
  Last update: 2019-07-12 14:35    [W:0.234 / U:0.860 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site