lkml.org 
[lkml]   [2019]   [Jul]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 2/2] drivers: qcom: rpmh-rsc: fix read back of trigger register
Switching Andy's email address.

On Mon, Jul 01 2019 at 09:32 -0600, Lina Iyer wrote:
>When triggering a TCS to send its contents, reading back the trigger
>value may return an incorrect value. That is because, writing the
>trigger may raise an interrupt which could be handled immediately and
>the trigger value could be reset in the interrupt handler. By doing a
>read back we may end up spinning waiting for the value we wrote.
>
>Fixes: 658628 ("drivers: qcom: rpmh-rsc: add RPMH controller for QCOM
>SoCs")
>Signed-off-by: Lina Iyer <ilina@codeaurora.org>
>---
> drivers/soc/qcom/rpmh-rsc.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
>diff --git a/drivers/soc/qcom/rpmh-rsc.c b/drivers/soc/qcom/rpmh-rsc.c
>index 92461311aef3..2fc2fa879480 100644
>--- a/drivers/soc/qcom/rpmh-rsc.c
>+++ b/drivers/soc/qcom/rpmh-rsc.c
>@@ -300,7 +300,7 @@ static void __tcs_trigger(struct rsc_drv *drv, int tcs_id)
> enable = TCS_AMC_MODE_ENABLE;
> write_tcs_reg_sync(drv, RSC_DRV_CONTROL, tcs_id, enable);
> enable |= TCS_AMC_MODE_TRIGGER;
>- write_tcs_reg_sync(drv, RSC_DRV_CONTROL, tcs_id, enable);
>+ write_tcs_reg(drv, RSC_DRV_CONTROL, tcs_id, enable);
> }
>
> static int check_for_req_inflight(struct rsc_drv *drv, struct tcs_group *tcs,
>--
>The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
>a Linux Foundation Collaborative Project
>

\
 
 \ /
  Last update: 2019-07-01 17:54    [W:0.081 / U:4.616 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site