lkml.org 
[lkml]   [2019]   [Jun]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 5/6] arm64: dts: Add ipq6018 SoC and CP01 board support
On Wed, Jun 05, 2019 at 10:58:57PM +0530, Sricharan R wrote:
> Add initial device tree support for the Qualcomm IPQ6018 SoC and
> CP01 evaluation board.
>
> Signed-off-by: Sricharan R <sricharan@codeaurora.org>
> Signed-off-by: Abhishek Sahu <absahu@codeaurora.org>
> ---
> arch/arm64/boot/dts/qcom/Makefile | 1 +
> arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts | 35 ++++
> arch/arm64/boot/dts/qcom/ipq6018.dtsi | 231 +++++++++++++++++++++++++++
> 3 files changed, 267 insertions(+)
> create mode 100644 arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts
> create mode 100644 arch/arm64/boot/dts/qcom/ipq6018.dtsi
>

[...]

> +
> + CPU3: cpu@3 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a53";
> + enable-method = "psci";
> + reg = <0x3>;
> + next-level-cache = <&L2_0>;
> + };
> +
> + L2_0: l2-cache {
> + compatible = "cache";
> + cache-level = <0x2>;
> + };
> + };
> +
> + pmuv8: pmu {
> + compatible = "arm,armv8-pmuv3";

We know these are Cortex-A53s, why not update these accordingly ?

--
Regards,
Sudeep

\
 
 \ /
  Last update: 2019-06-05 19:36    [W:0.436 / U:0.032 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site