Messages in this thread | | | Subject | Re: [PATCH 2/4] arm64: dts: meson-g12a-x96-max: add 32k clock to bluetooth node | From | Neil Armstrong <> | Date | Wed, 5 Jun 2019 09:36:05 +0200 |
| |
On 03/06/2019 11:47, Neil Armstrong wrote: > The 32k low power clock is necessary for the bluetooth part of the > combo module to initialize correctly, simply add the same clock we > use for the sdio pwrseq. > > Fixes: c5c9c7cff269 ("arm64: dts: meson-g12a-x96-max: Enable BT Module") > Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> > --- > arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts | 2 ++ > 1 file changed, 2 insertions(+) > > diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts > index 2c10ebfd9e7c..aa9da5de5c2d 100644 > --- a/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts > +++ b/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts > @@ -206,6 +206,8 @@ > bluetooth { > compatible = "brcm,bcm43438-bt"; > shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>; > + clocks = <&wifi32k>; > + clock-names = "lpo"; > }; > }; > >
The Fixes is wrong... wifi32k was not present at this time.
Neil
| |