Messages in this thread | | | From | Shakeel Butt <> | Date | Tue, 4 Jun 2019 10:11:58 -0700 | Subject | Re: [PATCH V2 2/2] zswap: Add module parameter malloc_movable_if_support |
| |
On Sun, Jun 2, 2019 at 2:47 AM Hui Zhu <teawaterz@linux.alibaba.com> wrote: > > This is the second version that was updated according to the comments > from Sergey Senozhatsky in https://lkml.org/lkml/2019/5/29/73 > > zswap compresses swap pages into a dynamically allocated RAM-based > memory pool. The memory pool should be zbud, z3fold or zsmalloc. > All of them will allocate unmovable pages. It will increase the > number of unmovable page blocks that will bad for anti-fragment. > > zsmalloc support page migration if request movable page: > handle = zs_malloc(zram->mem_pool, comp_len, > GFP_NOIO | __GFP_HIGHMEM | > __GFP_MOVABLE); > > And commit "zpool: Add malloc_support_movable to zpool_driver" add > zpool_malloc_support_movable check malloc_support_movable to make > sure if a zpool support allocate movable memory. > > This commit adds module parameter malloc_movable_if_support to enable > or disable zpool allocate block with gfp __GFP_HIGHMEM | __GFP_MOVABLE > if it support allocate movable memory (disabled by default). > > Following part is test log in a pc that has 8G memory and 2G swap. > > When it disabled: > echo lz4 > /sys/module/zswap/parameters/compressor > echo zsmalloc > /sys/module/zswap/parameters/zpool > echo 1 > /sys/module/zswap/parameters/enabled > swapon /swapfile > cd /home/teawater/kernel/vm-scalability/ > /home/teawater/kernel/vm-scalability# export unit_size=$((9 * 1024 * 1024 * 1024)) > /home/teawater/kernel/vm-scalability# ./case-anon-w-seq > 2717908992 bytes / 3977932 usecs = 667233 KB/s > 2717908992 bytes / 4160702 usecs = 637923 KB/s > 2717908992 bytes / 4354611 usecs = 609516 KB/s > 293359 usecs to free memory > 340304 usecs to free memory > 205781 usecs to free memory > 2717908992 bytes / 5588016 usecs = 474982 KB/s > 166124 usecs to free memory > /home/teawater/kernel/vm-scalability# cat /proc/pagetypeinfo > Page block order: 9 > Pages per block: 512 > > Free pages count per migrate type at order 0 1 2 3 4 5 6 7 8 9 10 > Node 0, zone DMA, type Unmovable 1 1 1 0 2 1 1 0 1 0 0 > Node 0, zone DMA, type Movable 0 0 0 0 0 0 0 0 0 1 3 > Node 0, zone DMA, type Reclaimable 0 0 0 0 0 0 0 0 0 0 0 > Node 0, zone DMA, type HighAtomic 0 0 0 0 0 0 0 0 0 0 0 > Node 0, zone DMA, type CMA 0 0 0 0 0 0 0 0 0 0 0 > Node 0, zone DMA, type Isolate 0 0 0 0 0 0 0 0 0 0 0 > Node 0, zone DMA32, type Unmovable 5 10 9 8 8 5 1 2 3 0 0 > Node 0, zone DMA32, type Movable 15 16 14 12 14 10 9 6 6 5 776 > Node 0, zone DMA32, type Reclaimable 0 0 0 0 0 0 0 0 0 0 0 > Node 0, zone DMA32, type HighAtomic 0 0 0 0 0 0 0 0 0 0 0 > Node 0, zone DMA32, type CMA 0 0 0 0 0 0 0 0 0 0 0 > Node 0, zone DMA32, type Isolate 0 0 0 0 0 0 0 0 0 0 0 > Node 0, zone Normal, type Unmovable 7097 6914 6473 5642 4373 2664 1220 319 78 4 0 > Node 0, zone Normal, type Movable 2092 3216 2820 2266 1585 946 559 359 237 258 378 > Node 0, zone Normal, type Reclaimable 47 88 122 80 34 9 5 4 2 1 2 > Node 0, zone Normal, type HighAtomic 0 0 0 0 0 0 0 0 0 0 0 > Node 0, zone Normal, type CMA 0 0 0 0 0 0 0 0 0 0 0 > Node 0, zone Normal, type Isolate 0 0 0 0 0 0 0 0 0 0 0 > > Number of blocks type Unmovable Movable Reclaimable HighAtomic CMA Isolate > Node 0, zone DMA 1 7 0 0 0 0 > Node 0, zone DMA32 4 1652 0 0 0 0 > Node 0, zone Normal 834 1572 25 0 0 0 > > When it enabled: > echo lz4 > /sys/module/zswap/parameters/compressor > echo zsmalloc > /sys/module/zswap/parameters/zpool > echo 1 > /sys/module/zswap/parameters/enabled > echo 1 > /sys/module/zswap/parameters/malloc_movable_if_support > swapon /swapfile > cd /home/teawater/kernel/vm-scalability/ > /home/teawater/kernel/vm-scalability# export unit_size=$((9 * 1024 * 1024 * 1024)) > /home/teawater/kernel/vm-scalability# ./case-anon-w-seq > 2717908992 bytes / 4721401 usecs = 562165 KB/s > 2717908992 bytes / 4783167 usecs = 554905 KB/s > 2717908992 bytes / 4802125 usecs = 552715 KB/s > 2717908992 bytes / 4866579 usecs = 545395 KB/s > 323605 usecs to free memory > 414817 usecs to free memory > 458576 usecs to free memory > 355827 usecs to free memory > /home/teawater/kernel/vm-scalability# cat /proc/pagetypeinfo > Page block order: 9 > Pages per block: 512 > > Free pages count per migrate type at order 0 1 2 3 4 5 6 7 8 9 10 > Node 0, zone DMA, type Unmovable 1 1 1 0 2 1 1 0 1 0 0 > Node 0, zone DMA, type Movable 0 0 0 0 0 0 0 0 0 1 3 > Node 0, zone DMA, type Reclaimable 0 0 0 0 0 0 0 0 0 0 0 > Node 0, zone DMA, type HighAtomic 0 0 0 0 0 0 0 0 0 0 0 > Node 0, zone DMA, type CMA 0 0 0 0 0 0 0 0 0 0 0 > Node 0, zone DMA, type Isolate 0 0 0 0 0 0 0 0 0 0 0 > Node 0, zone DMA32, type Unmovable 8 10 8 7 7 6 5 3 2 0 0 > Node 0, zone DMA32, type Movable 23 21 18 15 13 14 14 10 11 6 766 > Node 0, zone DMA32, type Reclaimable 0 0 0 0 0 0 0 0 0 0 1 > Node 0, zone DMA32, type HighAtomic 0 0 0 0 0 0 0 0 0 0 0 > Node 0, zone DMA32, type CMA 0 0 0 0 0 0 0 0 0 0 0 > Node 0, zone DMA32, type Isolate 0 0 0 0 0 0 0 0 0 0 0 > Node 0, zone Normal, type Unmovable 2660 1295 460 102 11 5 3 11 2 4 0 > Node 0, zone Normal, type Movable 4178 5760 5045 4137 3324 2306 1482 930 497 254 460 > Node 0, zone Normal, type Reclaimable 50 83 114 93 28 12 10 6 3 3 0 > Node 0, zone Normal, type HighAtomic 0 0 0 0 0 0 0 0 0 0 0 > Node 0, zone Normal, type CMA 0 0 0 0 0 0 0 0 0 0 0 > Node 0, zone Normal, type Isolate 0 0 0 0 0 0 0 0 0 0 0 > > Number of blocks type Unmovable Movable Reclaimable HighAtomic CMA Isolate > Node 0, zone DMA 1 7 0 0 0 0 > Node 0, zone DMA32 4 1650 2 0 0 0 > Node 0, zone Normal 81 2325 25 0 0 0 > > You can see that the number of unmovable page blocks is decreased > when malloc_movable_if_support is enabled. > > Signed-off-by: Hui Zhu <teawaterz@linux.alibaba.com> > --- > mm/zswap.c | 16 +++++++++++++--- > 1 file changed, 13 insertions(+), 3 deletions(-) > > diff --git a/mm/zswap.c b/mm/zswap.c > index a4e4d36ec085..2fc45de92383 100644 > --- a/mm/zswap.c > +++ b/mm/zswap.c > @@ -123,6 +123,13 @@ static bool zswap_same_filled_pages_enabled = true; > module_param_named(same_filled_pages_enabled, zswap_same_filled_pages_enabled, > bool, 0644); > > +/* Enable/disable zpool allocate block with gfp __GFP_HIGHMEM | __GFP_MOVABLE > + * if it support allocate movable memory (disabled by default). > + */ > +static bool __read_mostly zswap_malloc_movable_if_support; > +module_param_cb(malloc_movable_if_support, ¶m_ops_bool, > + &zswap_malloc_movable_if_support, 0644); > +
Any reason for the above tunable? Do we ever want to disable movable for zswap+zsmalloc?
> /********************************* > * data structures > **********************************/ > @@ -1006,6 +1013,7 @@ static int zswap_frontswap_store(unsigned type, pgoff_t offset, > char *buf; > u8 *src, *dst; > struct zswap_header zhdr = { .swpentry = swp_entry(type, offset) }; > + gfp_t gfp = __GFP_NORETRY | __GFP_NOWARN | __GFP_KSWAPD_RECLAIM; > > /* THP isn't supported */ > if (PageTransHuge(page)) { > @@ -1079,9 +1087,11 @@ static int zswap_frontswap_store(unsigned type, pgoff_t offset, > > /* store */ > hlen = zpool_evictable(entry->pool->zpool) ? sizeof(zhdr) : 0; > - ret = zpool_malloc(entry->pool->zpool, hlen + dlen, > - __GFP_NORETRY | __GFP_NOWARN | __GFP_KSWAPD_RECLAIM, > - &handle); > + if (zswap_malloc_movable_if_support && > + zpool_malloc_support_movable(entry->pool->zpool)) { > + gfp |= __GFP_HIGHMEM | __GFP_MOVABLE; > + } > + ret = zpool_malloc(entry->pool->zpool, hlen + dlen, gfp, &handle); > if (ret == -ENOSPC) { > zswap_reject_compress_poor++; > goto put_dstmem; > -- > 2.20.1 (Apple Git-117) >
| |