lkml.org 
[lkml]   [2019]   [Jun]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH v2 20/22] dt: bindings: fix some broken links from txt->yaml conversion
    Date
    Some new files got converted to yaml, but references weren't
    updated accordingly.

    Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
    ---
    Documentation/devicetree/bindings/media/st,stm32-dcmi.txt | 2 +-
    Documentation/devicetree/bindings/sound/st,stm32-i2s.txt | 2 +-
    Documentation/devicetree/bindings/sound/st,stm32-sai.txt | 2 +-
    MAINTAINERS | 2 +-
    4 files changed, 4 insertions(+), 4 deletions(-)

    diff --git a/Documentation/devicetree/bindings/media/st,stm32-dcmi.txt b/Documentation/devicetree/bindings/media/st,stm32-dcmi.txt
    index 249790a93017..3122ded82eb4 100644
    --- a/Documentation/devicetree/bindings/media/st,stm32-dcmi.txt
    +++ b/Documentation/devicetree/bindings/media/st,stm32-dcmi.txt
    @@ -11,7 +11,7 @@ Required properties:
    - clock-names: must contain "mclk", which is the DCMI peripherial clock
    - pinctrl: the pincontrol settings to configure muxing properly
    for pins that connect to DCMI device.
    - See Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt.
    + See Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml.
    - dmas: phandle to DMA controller node,
    see Documentation/devicetree/bindings/dma/stm32-dma.txt
    - dma-names: must contain "tx", which is the transmit channel from DCMI to DMA
    diff --git a/Documentation/devicetree/bindings/sound/st,stm32-i2s.txt b/Documentation/devicetree/bindings/sound/st,stm32-i2s.txt
    index 58c341300552..cbf24bcd1b8d 100644
    --- a/Documentation/devicetree/bindings/sound/st,stm32-i2s.txt
    +++ b/Documentation/devicetree/bindings/sound/st,stm32-i2s.txt
    @@ -18,7 +18,7 @@ Required properties:
    See Documentation/devicetree/bindings/dma/stm32-dma.txt.
    - dma-names: Identifier for each DMA request line. Must be "tx" and "rx".
    - pinctrl-names: should contain only value "default"
    - - pinctrl-0: see Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt
    + - pinctrl-0: see Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml

    Optional properties:
    - resets: Reference to a reset controller asserting the reset controller
    diff --git a/Documentation/devicetree/bindings/sound/st,stm32-sai.txt b/Documentation/devicetree/bindings/sound/st,stm32-sai.txt
    index 3f4467ff0aa2..944743dd9212 100644
    --- a/Documentation/devicetree/bindings/sound/st,stm32-sai.txt
    +++ b/Documentation/devicetree/bindings/sound/st,stm32-sai.txt
    @@ -41,7 +41,7 @@ SAI subnodes required properties:
    "tx": if sai sub-block is configured as playback DAI
    "rx": if sai sub-block is configured as capture DAI
    - pinctrl-names: should contain only value "default"
    - - pinctrl-0: see Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt
    + - pinctrl-0: see Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml

    SAI subnodes Optional properties:
    - st,sync: specify synchronization mode.
    diff --git a/MAINTAINERS b/MAINTAINERS
    index 0dc7c3c5ddb0..2ab2337a029c 100644
    --- a/MAINTAINERS
    +++ b/MAINTAINERS
    @@ -1298,7 +1298,7 @@ ARM PRIMECELL SSP PL022 SPI DRIVER
    M: Linus Walleij <linus.walleij@linaro.org>
    L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
    S: Maintained
    -F: Documentation/devicetree/bindings/spi/spi_pl022.txt
    +F: Documentation/devicetree/bindings/spi/spi-pl022.yaml
    F: drivers/spi/spi-pl022.c

    ARM PRIMECELL UART PL010 AND PL011 DRIVERS
    --
    2.21.0
    \
     
     \ /
      Last update: 2019-06-04 16:19    [W:4.282 / U:0.096 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site