lkml.org 
[lkml]   [2019]   [Jun]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    From
    Date
    SubjectRe: [PATCH 0/9] Add SD host controller support for SC9860 platform
    Hi Adrian & Ulf,

    On Mon, 20 May 2019 at 18:12, Baolin Wang <baolin.wang@linaro.org> wrote:
    >
    > This patch set adds optional clock support, HS400 enhanced strobe mode support,
    > PHY DLL configuration and other optimization to make the SD host controller
    > can work well on the Spreadtrum SC9860 platform.

    Do you have any comments for this patch set? Thanks.

    >
    > Baolin Wang (9):
    > mmc: sdhci-sprd: Check the enable clock's return value correctly
    > dt-bindings: mmc: sprd: Add another optional clock documentation
    > mmc: sdhci-sprd: Add optional gate clock support
    > mmc: sdhci-sprd: Implement the get_max_timeout_count() interface
    > mmc: sdhci-sprd: Add HS400 enhanced strobe mode
    > mmc: sdhci-sprd: Enable PHY DLL to make clock stable
    > dt-bindings: mmc: sprd: Add PHY DLL delay documentation
    > mmc: sdhci-sprd: Add PHY DLL delay configuration
    > arm64: dts: sprd: Add Spreadtrum SD host controller support
    >
    > .../devicetree/bindings/mmc/sdhci-sprd.txt | 19 +++
    > arch/arm64/boot/dts/sprd/whale2.dtsi | 35 ++++
    > drivers/mmc/host/sdhci-sprd.c | 171 +++++++++++++++++++-
    > 3 files changed, 217 insertions(+), 8 deletions(-)
    >
    > --
    > 1.7.9.5
    >


    --
    Baolin Wang
    Best Regards

    \
     
     \ /
      Last update: 2019-06-03 10:42    [W:5.143 / U:0.008 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site