Messages in this thread | | | From | Kevin Hilman <> | Subject | Re: [PATCH] arm64: dts: meson-g12a: add missing dwc2 phy-names | Date | Fri, 28 Jun 2019 11:41:04 -0700 |
| |
Neil Armstrong <narmstrong@baylibre.com> writes:
> The G12A USB2 OTG capable PHY uses a 8bit large UTMI bus, and the OTG > controller gets the PHY but width by probing the associated phy. > > By default it will use 16bit wide settings if a phy is not specified, > in our case we specified the phy, but not the phy-names. > > The dwc2 bindings specifies that if phys is present, phy-names shall be > "usb2-phy". > > Adding phy-names = "usb2-phy" solves the OTG PHY bus configuration. > > Fixes: 9baf7d6be730 ("arm64: dts: meson: g12a: Add G12A USB nodes") > Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Queuing for v5.3-rc,
Thanks,
Kevin
| |