lkml.org 
[lkml]   [2019]   [Jun]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] PCI: PM: Avoid skipping bus-level PM on platforms without ACPI
On Wed, Jun 26, 2019 at 12:20:23AM +0200, Rafael J. Wysocki wrote:
> From: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
>
> There are platforms that do not call pm_set_suspend_via_firmware(),
> so pm_suspend_via_firmware() returns 'false' on them, but the power
> states of PCI devices (PCIe ports in particular) are changed as a
> result of powering down core platform components during system-wide
> suspend. Thus the pm_suspend_via_firmware() checks in
> pci_pm_suspend_noirq() and pci_pm_resume_noirq() introduced by
> commit 3e26c5feed2a ("PCI: PM: Skip devices in D0 for suspend-to-
> idle") are not sufficient to determine that devices left in D0
> during suspend will remain in D0 during resume and so the bus-level
> power management can be skipped for them.
>
> For this reason, introduce a new global suspend flag,
> PM_SUSPEND_FLAG_NO_PLATFORM, set it for suspend-to-idle only
> and replace the pm_suspend_via_firmware() checks mentioned above
> with checks against this flag.
>
> Fixes: 3e26c5feed2a ("PCI: PM: Skip devices in D0 for suspend-to-idle")
> Reported-by: Jon Hunter <jonathanh@nvidia.com>
> Tested-by: Jon Hunter <jonathanh@nvidia.com>
> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

I tested this patch on top of your (and mine) previous patches touching
the ACPI/PCI PM and did not see any issues over several suspend-to-idle
cycles with and without TBT device connected.

Tested-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>

\
 
 \ /
  Last update: 2019-06-26 14:56    [W:0.028 / U:0.292 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site