lkml.org 
[lkml]   [2019]   [Jun]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] PCI/PME: Fix race on PME polling
On Mon, Jun 17, 2019 at 05:35:10PM +0300, Mika Westerberg wrote:
> Today when doing some PM testing I noticed that this patch actually
> reveals an issue in our native PME handling. Problem is in
> pcie_pme_handle_request() where we first convert req_id to struct
> pci_dev and then call pci_check_pme_status() for it. Now, when a device
> triggers wake the link is first brought up and then the PME is sent to
> root complex with req_id matching the originating device. However, if
> there are PCIe ports in the middle they may still be in D3 which means
> that pci_check_pme_status() returns 0xffff for the device below so there
> are lots of
>
> Spurious native interrupt"
>
> messages in the dmesg but the actual PME is never handled.
>
> It has been working because pci_check_pme_status() returned true in case
> of 0xffff as well and we went and runtime resumed to originating device.
>
> I think the correct way to handle this is actually drop the call to
> pci_check_pme_status() in pcie_pme_handle_request() because the whole
> idea of req_id in PME message is to allow the root complex and SW to
> identify the device without need to poll for the PME status bit.

Either that or the call to pci_check_pme_status() should be encapsulated
in a pci_config_pm_runtime_get() / _put() pair.

Thanks,

Lukas

\
 
 \ /
  Last update: 2019-06-17 16:55    [W:0.053 / U:0.120 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site