lkml.org 
[lkml]   [2019]   [Jun]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    From
    SubjectRE: [PATCH 0/6] net: macb patch set cover letter
    Date
    Hi All,

    Please ignore patches sent in-reply chain to patch 0001.
    Sending all patches in reply to patch 0000-cover-letter.patch.

    Regards,
    Parshuram Thombare


    >-----Original Message-----
    >From: Parshuram Thombare <pthombar@cadence.com>
    >Sent: Sunday, June 16, 2019 5:15 AM
    >To: andrew@lunn.ch; nicolas.ferre@microchip.com; davem@davemloft.net;
    >f.fainelli@gmail.com
    >Cc: netdev@vger.kernel.org; hkallweit1@gmail.com; linux-
    >kernel@vger.kernel.org; Rafal Ciepiela <rafalc@cadence.com>; Anil Joy
    >Varughese <aniljoy@cadence.com>; Piotr Sroka <piotrs@cadence.com>;
    >Parshuram Raju Thombare <pthombar@cadence.com>
    >Subject: [PATCH 0/6] net: macb patch set cover letter
    >
    >Hello !,
    >
    >This is second version of patch set containing following patches for Cadence
    >ethernet controller driver.
    >
    >1. 0001-net-macb-add-phylink-support.patch
    > Replace phylib API's with phylink API's.
    >2. 0002-net-macb-add-support-for-sgmii-MAC-PHY-interface.patch
    > This patch add support for SGMII mode.
    >3. 003-net-macb-add-PHY-configuration-in-MACB-PCI-wrapper.patch
    > This patch is to configure TI PHY DP83867 in SGMII mode from
    > our MAC PCI wrapper driver.
    > With this change there is no need of PHY driver and dp83867
    > module must be disabled. Users wanting to setup DP83867 PHY
    > in SGMII mode can disable dp83867.ko driver, else dp83867.ko
    > overwrite this configuration and PHY is setup as per dp83867.ko.
    >4. 0004-net-macb-add-support-for-c45-PHY.patch
    > This patch is to support C45 PHY.
    >5. 0005-net-macb-add-support-for-high-speed-interface
    > This patch add support for 10G USXGMII PCS in fixed mode.
    > Since emulated PHY used in fixed mode doesn't seems to
    > support anything above 1G, additional parameter is used outside
    > "fixed-link" node for selecting speed and "fixed-link"
    > node speed is still set at 1G.
    >6. 0006-net-macb-parameter-added-to-cadence-ethernet-controller-DT-binding
    > New parameters added to Cadence ethernet controller DT binding
    > for USXGMII interface.
    >
    >Regards,
    >Parshuram Thombare
    >
    >Parshuram Thombare (6):
    > net: macb: add phylink support
    > net: macb: add support for sgmii MAC-PHY interface
    > net: macb: add PHY configuration in MACB PCI wrapper
    > net: macb: add support for c45 PHY
    > net: macb: add support for high speed interface
    > net: macb: parameter added to cadence ethernet controller DT binding
    >
    > .../devicetree/bindings/net/macb.txt | 4 +
    > drivers/net/ethernet/cadence/Kconfig | 2 +-
    > drivers/net/ethernet/cadence/macb.h | 136 +++-
    > drivers/net/ethernet/cadence/macb_main.c | 659 ++++++++++++++----
    > drivers/net/ethernet/cadence/macb_pci.c | 225 ++++++
    > 5 files changed, 860 insertions(+), 166 deletions(-)
    >
    >--
    >2.17.1

    \
     
     \ /
      Last update: 2019-06-16 08:57    [W:3.778 / U:0.024 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site