Messages in this thread | | | From | Fabio Estevam <> | Date | Sun, 16 Jun 2019 20:30:56 -0300 | Subject | Re: [PATCH 1/2] ARM: dts: Add ZII support for ZII i.MX7 RMU2 board |
| |
Hi Andrey,
On Fri, Jun 14, 2019 at 5:03 AM Andrey Smirnov <andrew.smirnov@gmail.com> wrote:
> + mdio { > + fec1_phy: phy@0 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_enet1_phy_reset>, > + <&pinctrl_enet1_phy_interrupt>; > + reg = <0>; > + interrupt-parent = <&gpio1>; > + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; > + reset-gpio = <&gpio5 11 GPIO_ACTIVE_LOW>;
According to Documentation/devicetree/bindings/net/mdio.txt this should be reset-gpios instead.
| |