lkml.org 
[lkml]   [2019]   [Jun]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 2/2] arm64: dts: meson: g12a: x96-max: add the Ethernet PHY interrupt line
From
Date
On 10/06/2019 18:45, Martin Blumenstingl wrote:
> X96 Max has the PHY reset and interrupt lines are identical to the
> Odroid-N2:
> - GPIOZ_14 is the interrupt on X96 Max
> - GPIOZ_15 is the reset line on X96 Max
>
> Add GPIOZ_14 as PHY interrupt line on the X96 Max so we don't have to
> poll for the PHY status.
>
> Suggested-by: Neil Armstrong <narmstrong@baylibre.com>
> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
> ---
> arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts | 4 ++++
> 1 file changed, 4 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts
> index 24956edaf8e2..e3f3f37d3081 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts
> +++ b/arch/arm64/boot/dts/amlogic/meson-g12a-x96-max.dts
> @@ -180,6 +180,10 @@
> reset-assert-us = <10000>;
> reset-deassert-us = <10000>;
> reset-gpios = <&gpio GPIOZ_15 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
> +
> + interrupt-parent = <&gpio_intc>;
> + /* MAC_INTR on GPIOZ_14 */
> + interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
> };
> };
>
>


[ 46.844307] RTL8211F Gigabit Ethernet 0.0:00: attached PHY driver [RTL8211F Gigabit Ethernet] (mii_bus:phy_addr=0.0:00, irq=28)

# cat /proc/interrupts
CPU0 CPU1 CPU2 CPU3
...
28: 5 0 0 0 meson-gpio-irqchip 26 Level 0.0:00
...


Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Tested-by: Neil Armstrong <narmstrong@baylibre.com>

\
 
 \ /
  Last update: 2019-06-14 11:21    [W:0.069 / U:0.132 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site