lkml.org 
[lkml]   [2019]   [Jun]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v1 3/3] dt-bindings: iio: afe: Add hwmon example
Date
With the support of CHAN_INFO_PROCESSED in voltage-divider,
it is possible to read the processed values directly from iio's
sysfs entries or by using iio-hwmon. Add an example for this last
use case.

Signed-off-by: Mylène Josserand <mylene.josserand@bootlin.com>
---
.../bindings/iio/afe/voltage-divider.txt | 24 ++++++++++++++++++++++
1 file changed, 24 insertions(+)

diff --git a/Documentation/devicetree/bindings/iio/afe/voltage-divider.txt b/Documentation/devicetree/bindings/iio/afe/voltage-divider.txt
index b452a8406107..f7e1c7cb2744 100644
--- a/Documentation/devicetree/bindings/iio/afe/voltage-divider.txt
+++ b/Documentation/devicetree/bindings/iio/afe/voltage-divider.txt
@@ -51,3 +51,27 @@ sysv {
spi-max-frequency = <1000000>;
};
};
+
+It is also possible to retrieve the processed values using hwmon node:
+
+div0: div0 {
+ compatible = "voltage-divider";
+ io-channels = <&adc0 0>; /* Channel 0 of the ADC */
+ output-ohms = <47>; /* R2 */
+ full-ohms = <73>; /* R1 (26) + R2 (47) */
+ #io-channel-cells = <1>;
+};
+
+div1: div1 {
+ compatible = "voltage-divider";
+ io-channels = <&adc0 1>; /* Channel 1 of the ADC */
+ output-ohms = <47>; /* R2 */
+ full-ohms = <115>; /* R1 (68) + R2 (47) */
+ #io-channel-cells = <1>;
+};
+
+iio-hwmon {
+ compatible = "iio-hwmon";
+ io-channels = <&div0 0>, <&div1 0>;
+ io-channel-names = "3v3", "usb";
+};
--
2.11.0
\
 
 \ /
  Last update: 2019-06-11 11:58    [W:0.047 / U:1.408 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site