Messages in this thread | | | Date | Tue, 11 Jun 2019 17:14:25 -0600 | From | Rob Herring <> | Subject | Re: [PATCHv7 1/3] dt-bindings: i2c: document bindings for i2c-slave-mqueue |
| |
On Wed, Jun 05, 2019 at 09:46:49AM -0700, Eduardo Valentin wrote: > Document the i2c-slave-mqueue binding by adding > descriptor, required properties, and example. > > Cc: Rob Herring <robh+dt@kernel.org> > Cc: Mark Rutland <mark.rutland@arm.com> > Cc: Wolfram Sang <wsa@the-dreams.de> > Cc: linux-i2c@vger.kernel.org > Cc: devicetree@vger.kernel.org > Cc: linux-kernel@vger.kernel.org > Signed-off-by: Eduardo Valentin <eduval@amazon.com> > --- > > Changes from V6 to V7: > - none > > .../bindings/i2c/i2c-slave-mqueue.txt | 34 +++++++++++++++++++ > 1 file changed, 34 insertions(+) > create mode 100644 Documentation/devicetree/bindings/i2c/i2c-slave-mqueue.txt > > diff --git a/Documentation/devicetree/bindings/i2c/i2c-slave-mqueue.txt b/Documentation/devicetree/bindings/i2c/i2c-slave-mqueue.txt > new file mode 100644 > index 000000000000..eb1881a4fc0e > --- /dev/null > +++ b/Documentation/devicetree/bindings/i2c/i2c-slave-mqueue.txt > @@ -0,0 +1,34 @@ > +=============================================== > +Device Tree for I2C slave message queue backend > +=============================================== > + > +Some protocols over I2C/SMBus are designed for bi-directional transferring > +messages by using I2C Master Write protocol. This requires that both sides > +of the communication have slave addresses.
So the address 0x10 in the example below is the address of the I2C controller?
> + > +This I2C slave mqueue (message queue) is used to receive and queue > +messages from the remote i2c intelligent device; and it will add the target > +slave address (with R/W# bit is always 0) into the message at the first byte. > + > +Links > +---- > +`Intelligent Platform Management Bus > +Communications Protocol Specification > +<https://www.intel.com/content/dam/www/public/us/en/documents/product-briefs/ipmp-spec-v1.0.pdf>`_ > + > +`Management Component Transport Protocol (MCTP) > +SMBus/I2C Transport Binding Specification > +<https://www.dmtf.org/sites/default/files/standards/documents/DSP0237_1.1.0.pdf>`_ > + > +Required Properties: > +- compatible : should be "i2c-slave-mqueue"
There is no mention of mqueue (or queue) in these specs. Where does that come from? Perhaps something more closely matching the protocol would be better name.
> +- reg : slave address > + > +Example: > + > +i2c {
Would there be other slaves?
The common binding states 'multi-master' property should be present.
I need a more complete example.
> + slave_mqueue: i2c-slave-mqueue { > + compatible = "i2c-slave-mqueue"; > + reg = <0x10>; > + }; > +}; > -- > 2.21.0 >
| |