lkml.org 
[lkml]   [2019]   [May]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 15/18] fpga: dfl: fme: add thermal management support
On Tue, May 07, 2019 at 11:35:36AM -0700, Guenter Roeck wrote:
> On Tue, May 07, 2019 at 01:20:52PM -0500, Alan Tull wrote:
> > On Mon, Apr 29, 2019 at 4:13 AM Wu Hao <hao.wu@intel.com> wrote:
> >
> > + The hwmon people
> >
> > >
> > > This patch adds support to thermal management private feature for DFL
> > > FPGA Management Engine (FME). This private feature driver registers
> > > a hwmon for thermal/temperature monitoring (hwmon temp1_input).
> > > If hardware automatic throttling is supported by this hardware, then
> > > driver also exposes sysfs interfaces under hwmon for thresholds
> > > (temp1_alarm/ crit/ emergency), threshold status (temp1_alarm_status/
> > > temp1_crit_status) and throttling policy (temp1_alarm_policy).
> > >
> > > Signed-off-by: Luwei Kang <luwei.kang@intel.com>
> > > Signed-off-by: Russ Weight <russell.h.weight@intel.com>
> > > Signed-off-by: Xu Yilun <yilun.xu@intel.com>
> > > Signed-off-by: Wu Hao <hao.wu@intel.com>
> > > ---
> > > v2: create a dfl_fme_thermal hwmon to expose thermal information.
> > > move all sysfs interfaces under hwmon
> > > tempareture --> hwmon temp1_input
> > > threshold1 --> hwmon temp1_alarm
> > > threshold2 --> hwmon temp1_crit
> > > trip_threshold --> hwmon temp1_emergency
> > > threshold1_status --> hwmon temp1_alarm_status
> > > threshold2_status --> hwmon temp1_crit_status
> > > threshold1_policy --> hwmon temp1_alarm_policy
>
> You should not write a hwmon driver if you don't want to follow the ABI.
> The implementation will only confuse the sensors command, so what exactly
> is the point ?
>
> More on that below.

Hi Guenter,

Thanks a lot for the review comments. Yes, I should use the standard ABI of
the hwmon. I will fix them in the next version patch.

For thermal hwmon

tempareture --> hwmon temp1_input
threshold1 --> hwmon temp1_alarm ---> temp1_max
threshold2 --> hwmon temp1_crit
trip_threshold --> hwmon temp1_emergency
threshold1_status --> hwmon temp1_alarm_status ---> temp1_max_alarm
threshold2_status --> hwmon temp1_crit_status ---> temp1_crit_alarm
threshold1_policy --> hwmon temp1_alarm_policy ---> temp1_max_policy

and power hwmon

consumed --> hwmon power1_input
threshold1 --> hwmon power1_cap ---> power1_max
threshold2 --> hwmon power1_crit
threshold1_status --> hwmon power1_cap_status ---> power1_max_alarm
threshold2_status --> hwmon power1_crit_status ---> power1_crit_alarm
xeon_limit --> hwmon power1_xeon_limit
fpga_limit --> hwmon power1_fpga_limit
ltr --> hwmon power1_ltr

switch to power1_max in power hwmon to make it aligned with thermal hwmon on
threshold1.

Thanks
Hao

>
> Guenter
>
> > > ---
> > > Documentation/ABI/testing/sysfs-platform-dfl-fme | 64 +++++++
> > > drivers/fpga/Kconfig | 2 +-
> > > drivers/fpga/dfl-fme-main.c | 212 +++++++++++++++++++++++
> > > 3 files changed, 277 insertions(+), 1 deletion(-)
> > >
> > > diff --git a/Documentation/ABI/testing/sysfs-platform-dfl-fme b/Documentation/ABI/testing/sysfs-platform-dfl-fme
> > > index d1aa375..dfbd315 100644
> > > --- a/Documentation/ABI/testing/sysfs-platform-dfl-fme
> > > +++ b/Documentation/ABI/testing/sysfs-platform-dfl-fme
> > > @@ -44,3 +44,67 @@ Description: Read-only. It returns socket_id to indicate which socket
> > > this FPGA belongs to, only valid for integrated solution.
> > > User only needs this information, in case standard numa node
> > > can't provide correct information.
> > > +
> > > +What: /sys/bus/platform/devices/dfl-fme.0/hwmon/hwmonX/name
> > > +Date: April 2019
> > > +KernelVersion: 5.2
> > > +Contact: Wu Hao <hao.wu@intel.com>
> > > +Description: Read-Only. Read this file to get the name of hwmon device, it
> > > + supports values:
> > > + 'dfl_fme_thermal' - thermal hwmon device name
> > > +
> > > +What: /sys/bus/platform/devices/dfl-fme.0/hwmon/hwmonX/temp1_input
> > > +Date: April 2019
> > > +KernelVersion: 5.2
> > > +Contact: Wu Hao <hao.wu@intel.com>
> > > +Description: Read-Only. It returns FPGA device temperature in millidegrees
> > > + Celsius.
> > > +
> > > +What: /sys/bus/platform/devices/dfl-fme.0/hwmon/hwmonX/temp1_alarm
> > > +Date: April 2019
> > > +KernelVersion: 5.2
> > > +Contact: Wu Hao <hao.wu@intel.com>
> > > +Description: Read-Only. It returns hardware threshold1 temperature in
> > > + millidegrees Celsius. If temperature rises at or above this
> > > + threshold, hardware starts 50% or 90% throttling (see
> > > + 'temp1_alarm_policy').
> > > +
>
> This does not follow the ABI. temp1_alarm is the alarm status, not the alarm
> temperature. The ABI attribute name would be temp1_max.
>
> > > +What: /sys/bus/platform/devices/dfl-fme.0/hwmon/hwmonX/temp1_crit
> > > +Date: April 2019
> > > +KernelVersion: 5.2
> > > +Contact: Wu Hao <hao.wu@intel.com>
> > > +Description: Read-Only. It returns hardware threshold2 temperature in
> > > + millidegrees Celsius. If temperature rises at or above this
> > > + threshold, hardware starts 100% throttling.
> > > +
> > > +What: /sys/bus/platform/devices/dfl-fme.0/hwmon/hwmonX/temp1_emergency
> > > +Date: April 2019
> > > +KernelVersion: 5.2
> > > +Contact: Wu Hao <hao.wu@intel.com>
> > > +Description: Read-Only. It returns hardware trip threshold temperature in
> > > + millidegrees Celsius. If temperature rises at or above this
> > > + threshold, a fatal event will be triggered to board management
> > > + controller (BMC) to shutdown FPGA.
> > > +
> > > +What: /sys/bus/platform/devices/dfl-fme.0/hwmon/hwmonX/temp1_alarm_status
> > > +Date: April 2019
> > > +KernelVersion: 5.2
> > > +Contact: Wu Hao <hao.wu@intel.com>
> > > +Description: Read-only. It returns 1 if temperature is currently at or above
> > > + hardware threshold1 (see 'temp1_alarm'), otherwise 0.
> > > +
>
> Why not follow the ABI and use temp1_alarm ?
>
> > > +What: /sys/bus/platform/devices/dfl-fme.0/hwmon/hwmonX/temp1_crit_status
> > > +Date: April 2019
> > > +KernelVersion: 5.2
> > > +Contact: Wu Hao <hao.wu@intel.com>
> > > +Description: Read-only. It returns 1 if temperature is currently at or above
> > > + hardware threshold2 (see 'temp1_crit'), otherwise 0.
> > > +
>
> Why not follow the ABI and use temp1_crit_alarm ?
>
> > > +What: /sys/bus/platform/devices/dfl-fme.0/hwmon/hwmonX/temp1_alarm_policy
> > > +Date: April 2019
> > > +KernelVersion: 5.2
> > > +Contact: Wu Hao <hao.wu@intel.com>
> > > +Description: Read-Only. Read this file to get the policy of hardware threshold1
> > > + (see 'temp1_alarm'). It only supports two values (policies):
> > > + 0 - AP2 state (90% throttling)
> > > + 1 - AP1 state (50% throttling)
> > > diff --git a/drivers/fpga/Kconfig b/drivers/fpga/Kconfig
> > > index c20445b..a6d7588 100644
> > > --- a/drivers/fpga/Kconfig
> > > +++ b/drivers/fpga/Kconfig
> > > @@ -154,7 +154,7 @@ config FPGA_DFL
> > >
> > > config FPGA_DFL_FME
> > > tristate "FPGA DFL FME Driver"
> > > - depends on FPGA_DFL
> > > + depends on FPGA_DFL && HWMON
> > > help
> > > The FPGA Management Engine (FME) is a feature device implemented
> > > under Device Feature List (DFL) framework. Select this option to
> > > diff --git a/drivers/fpga/dfl-fme-main.c b/drivers/fpga/dfl-fme-main.c
> > > index 8339ee8..b9a68b8 100644
> > > --- a/drivers/fpga/dfl-fme-main.c
> > > +++ b/drivers/fpga/dfl-fme-main.c
> > > @@ -14,6 +14,8 @@
> > > * Henry Mitchel <henry.mitchel@intel.com>
> > > */
> > >
> > > +#include <linux/hwmon.h>
> > > +#include <linux/hwmon-sysfs.h>
> > > #include <linux/kernel.h>
> > > #include <linux/module.h>
> > > #include <linux/uaccess.h>
> > > @@ -217,6 +219,212 @@ static long fme_hdr_ioctl(struct platform_device *pdev,
> > > .ioctl = fme_hdr_ioctl,
> > > };
> > >
> > > +#define FME_THERM_THRESHOLD 0x8
> > > +#define TEMP_THRESHOLD1 GENMASK_ULL(6, 0)
> > > +#define TEMP_THRESHOLD1_EN BIT_ULL(7)
> > > +#define TEMP_THRESHOLD2 GENMASK_ULL(14, 8)
> > > +#define TEMP_THRESHOLD2_EN BIT_ULL(15)
> > > +#define TRIP_THRESHOLD GENMASK_ULL(30, 24)
> > > +#define TEMP_THRESHOLD1_STATUS BIT_ULL(32) /* threshold1 reached */
> > > +#define TEMP_THRESHOLD2_STATUS BIT_ULL(33) /* threshold2 reached */
> > > +/* threshold1 policy: 0 - AP2 (90% throttle) / 1 - AP1 (50% throttle) */
> > > +#define TEMP_THRESHOLD1_POLICY BIT_ULL(44)
> > > +
> > > +#define FME_THERM_RDSENSOR_FMT1 0x10
> > > +#define FPGA_TEMPERATURE GENMASK_ULL(6, 0)
> > > +
> > > +#define FME_THERM_CAP 0x20
> > > +#define THERM_NO_THROTTLE BIT_ULL(0)
> > > +
> > > +#define MD_PRE_DEG
> > > +
> > > +static bool fme_thermal_throttle_support(void __iomem *base)
> > > +{
> > > + u64 v = readq(base + FME_THERM_CAP);
> > > +
> > > + return FIELD_GET(THERM_NO_THROTTLE, v) ? false : true;
> > > +}
> > > +
> > > +static umode_t thermal_hwmon_attrs_visible(const void *drvdata,
> > > + enum hwmon_sensor_types type,
> > > + u32 attr, int channel)
> > > +{
> > > + const struct dfl_feature *feature = drvdata;
> > > +
> > > + /* temperature is always supported, and check hardware cap for others */
> > > + if (attr == hwmon_temp_input)
> > > + return 0444;
> > > +
> > > + return fme_thermal_throttle_support(feature->ioaddr) ? 0444 : 0;
> > > +}
> > > +
> > > +static int thermal_hwmon_read(struct device *dev, enum hwmon_sensor_types type,
> > > + u32 attr, int channel, long *val)
> > > +{
> > > + struct dfl_feature *feature = dev_get_drvdata(dev);
> > > + u64 v;
> > > +
> > > + switch (attr) {
> > > + case hwmon_temp_input:
> > > + v = readq(feature->ioaddr + FME_THERM_RDSENSOR_FMT1);
> > > + *val = (long)(FIELD_GET(FPGA_TEMPERATURE, v) * 1000);
> > > + break;
> > > + case hwmon_temp_alarm:
> > > + v = readq(feature->ioaddr + FME_THERM_THRESHOLD);
> > > + *val = (long)(FIELD_GET(TEMP_THRESHOLD1, v) * 1000);
>
> This is supposed to return 0 or 1.
>
> > > + break;
> > > + case hwmon_temp_crit:
> > > + v = readq(feature->ioaddr + FME_THERM_THRESHOLD);
> > > + *val = (long)(FIELD_GET(TEMP_THRESHOLD2, v) * 1000);
> > > + break;
> > > + case hwmon_temp_emergency:
> > > + v = readq(feature->ioaddr + FME_THERM_THRESHOLD);
> > > + *val = (long)(FIELD_GET(TRIP_THRESHOLD, v) * 1000);
> > > + break;
> > > + default:
> > > + return -EOPNOTSUPP;
> > > + }
> > > +
> > > + return 0;
> > > +}
> > > +
> > > +static const struct hwmon_ops thermal_hwmon_ops = {
> > > + .is_visible = thermal_hwmon_attrs_visible,
> > > + .read = thermal_hwmon_read,
> > > +};
> > > +
> > > +static const u32 thermal_hwmon_temp_config[] = {
> > > + HWMON_T_INPUT | HWMON_T_ALARM | HWMON_T_CRIT | HWMON_T_EMERGENCY,
> > > + 0
> > > +};
> > > +
> > > +static const struct hwmon_channel_info hwmon_temp_info = {
> > > + .type = hwmon_temp,
> > > + .config = thermal_hwmon_temp_config,
> > > +};
> > > +
> > > +static const struct hwmon_channel_info *thermal_hwmon_info[] = {
> > > + &hwmon_temp_info,
> > > + NULL
> > > +};
> > > +
> > > +static const struct hwmon_chip_info thermal_hwmon_chip_info = {
> > > + .ops = &thermal_hwmon_ops,
> > > + .info = thermal_hwmon_info,
> > > +};
> > > +
> > > +static ssize_t temp1_alarm_status_show(struct device *dev,
> > > + struct device_attribute *attr, char *buf)
> > > +{
> > > + struct dfl_feature *feature = dev_get_drvdata(dev);
> > > + u64 v;
> > > +
> > > + v = readq(feature->ioaddr + FME_THERM_THRESHOLD);
> > > +
> > > + return scnprintf(buf, PAGE_SIZE, "%u\n",
> > > + (unsigned int)FIELD_GET(TEMP_THRESHOLD1_STATUS, v));
> > > +}
> > > +
> > > +static ssize_t temp1_crit_status_show(struct device *dev,
> > > + struct device_attribute *attr, char *buf)
> > > +{
> > > + struct dfl_feature *feature = dev_get_drvdata(dev);
> > > + u64 v;
> > > +
> > > + v = readq(feature->ioaddr + FME_THERM_THRESHOLD);
> > > +
> > > + return scnprintf(buf, PAGE_SIZE, "%u\n",
> > > + (unsigned int)FIELD_GET(TEMP_THRESHOLD2_STATUS, v));
> > > +}
> > > +
> > > +static ssize_t temp1_alarm_policy_show(struct device *dev,
> > > + struct device_attribute *attr, char *buf)
> > > +{
> > > + struct dfl_feature *feature = dev_get_drvdata(dev);
> > > + u64 v;
> > > +
> > > + v = readq(feature->ioaddr + FME_THERM_THRESHOLD);
> > > +
> > > + return scnprintf(buf, PAGE_SIZE, "%u\n",
> > > + (unsigned int)FIELD_GET(TEMP_THRESHOLD1_POLICY, v));
> > > +}
> > > +
> > > +static DEVICE_ATTR_RO(temp1_alarm_status);
> > > +static DEVICE_ATTR_RO(temp1_crit_status);
> > > +static DEVICE_ATTR_RO(temp1_alarm_policy);
> > > +
> > > +static struct attribute *thermal_extra_attrs[] = {
> > > + &dev_attr_temp1_alarm_status.attr,
> > > + &dev_attr_temp1_crit_status.attr,
>
> Why not use standard attributes for the above ?
>
> > > + &dev_attr_temp1_alarm_policy.attr,
> > > + NULL,
> > > +};
> > > +
> > > +static umode_t thermal_extra_attrs_visible(struct kobject *kobj,
> > > + struct attribute *attr, int index)
> > > +{
> > > + struct device *dev = kobj_to_dev(kobj);
> > > + struct dfl_feature *feature = dev_get_drvdata(dev);
> > > +
> > > + return fme_thermal_throttle_support(feature->ioaddr) ? attr->mode : 0;
> > > +}
> > > +
> > > +static const struct attribute_group thermal_extra_group = {
> > > + .attrs = thermal_extra_attrs,
> > > + .is_visible = thermal_extra_attrs_visible,
> > > +};
> > > +__ATTRIBUTE_GROUPS(thermal_extra);
> > > +
> > > +static int fme_thermal_mgmt_init(struct platform_device *pdev,
> > > + struct dfl_feature *feature)
> > > +{
> > > + struct device *hwmon;
> > > +
> > > + dev_dbg(&pdev->dev, "FME Thermal Management Init.\n");
> > > +
> > > + /*
> > > + * create hwmon to allow userspace monitoring temperature and other
> > > + * threshold information.
> > > + *
> > > + * temp1_alarm -> hardware threshold 1 -> 50% or 90% throttling
> > > + * temp1_crit -> hardware threshold 2 -> 100% throttling
> > > + * temp1_emergency -> hardware trip_threshold to shutdown FPGA
> > > + *
> > > + * create device specific sysfs interfaces, e.g. read temp1_alarm_policy
> > > + * to understand the actual hardware throttling action (50% vs 90%).
> > > + *
> > > + * If hardware doesn't support automatic throttling per thresholds,
> > > + * then all above sysfs interfaces are not visible except temp1_input
> > > + * for temperature.
> > > + */
> > > + hwmon = devm_hwmon_device_register_with_info(&pdev->dev,
> > > + "dfl_fme_thermal", feature,
> > > + &thermal_hwmon_chip_info,
> > > + thermal_extra_groups);
> > > + if (IS_ERR(hwmon)) {
> > > + dev_err(&pdev->dev, "Fail to register thermal hwmon\n");
> > > + return PTR_ERR(hwmon);
> > > + }
> > > +
> > > + return 0;
> > > +}
> > > +
> > > +static void fme_thermal_mgmt_uinit(struct platform_device *pdev,
> > > + struct dfl_feature *feature)
> > > +{
> > > + dev_dbg(&pdev->dev, "FME Thermal Management UInit.\n");
> > > +}
> > > +
> > > +static const struct dfl_feature_id fme_thermal_mgmt_id_table[] = {
> > > + {.id = FME_FEATURE_ID_THERMAL_MGMT,},
> > > + {0,}
> > > +};
> > > +
> > > +static const struct dfl_feature_ops fme_thermal_mgmt_ops = {
> > > + .init = fme_thermal_mgmt_init,
> > > + .uinit = fme_thermal_mgmt_uinit,
> > > +};
> > > +
> > > static struct dfl_feature_driver fme_feature_drvs[] = {
> > > {
> > > .id_table = fme_hdr_id_table,
> > > @@ -227,6 +435,10 @@ static long fme_hdr_ioctl(struct platform_device *pdev,
> > > .ops = &fme_pr_mgmt_ops,
> > > },
> > > {
> > > + .id_table = fme_thermal_mgmt_id_table,
> > > + .ops = &fme_thermal_mgmt_ops,
> > > + },
> > > + {
> > > .ops = NULL,
> > > },
> > > };
> > > --
> > > 1.8.3.1
> > >

\
 
 \ /
  Last update: 2019-05-08 08:24    [W:1.398 / U:0.320 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site