lkml.org 
[lkml]   [2019]   [May]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 2/2] mmc: sdhci-iproc: Set NO_HISPD bit to fix HS50 data hold time problem
Date
From: Trac Hoang <trac.hoang@broadcom.com>

The iproc host eMMC/SD controller hold time does not meet the
specification in the HS50 mode. This problem can be mitigated
by disabling the HISPD bit; thus forcing the controller output
data to be driven on the falling clock edges rather than the
rising clock edges.

Cc: stable@vger.kernel.org # v4.12+
Signed-off-by: Trac Hoang <trac.hoang@broadcom.com>
Signed-off-by: Scott Branden <scott.branden@broadcom.com>
---
drivers/mmc/host/sdhci-iproc.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/mmc/host/sdhci-iproc.c b/drivers/mmc/host/sdhci-iproc.c
index 9d4071c41c94..2feb4ef32035 100644
--- a/drivers/mmc/host/sdhci-iproc.c
+++ b/drivers/mmc/host/sdhci-iproc.c
@@ -220,7 +220,8 @@ static const struct sdhci_iproc_data iproc_cygnus_data = {

static const struct sdhci_pltfm_data sdhci_iproc_pltfm_data = {
.quirks = SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK |
- SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12,
+ SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12 |
+ SDHCI_QUIRK_NO_HISPD_BIT,
.quirks2 = SDHCI_QUIRK2_ACMD23_BROKEN,
.ops = &sdhci_iproc_ops,
};
--
2.17.1
\
 
 \ /
  Last update: 2019-05-08 18:41    [W:0.045 / U:0.416 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site