lkml.org 
[lkml]   [2019]   [May]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v4 01/11] drm: Add atomic variants of enable/disable to encoder helper funcs
On Wed, May 08, 2019 at 12:09:06PM -0400, Sean Paul wrote:
> From: Sean Paul <seanpaul@chromium.org>
>
> This patch adds atomic_enable and atomic_disable callbacks to the
> encoder helpers. This will allow encoders to make informed decisions in
> their start-up/shutdown based on the committed state.
>
> Aside from the new hooks, this patch also introduces the new signature
> for .atomic_* functions going forward. Instead of passing object state
> (well, encoders don't have atomic state, but let's ignore that), we pass
> the entire atomic state so the driver can inspect more than what's
> happening locally.
>
> This is particularly important for the upcoming self refresh helpers.
>
> Changes in v3:
> - Added patch to the set
> Changes in v4:
> - Move atomic_disable above prepare (Daniel)
> - Add breadcrumb to .enable() docbook (Daniel)

Why no r-b: me or did you not apply all my suggestions? Too lazy to read
it all again :-)
-Daniel

>
> Link to v3: https://patchwork.freedesktop.org/patch/msgid/20190502194956.218441-2-sean@poorly.run
>
> Cc: Daniel Vetter <daniel@ffwll.ch>
> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
> Signed-off-by: Sean Paul <seanpaul@chromium.org>
> ---
> drivers/gpu/drm/drm_atomic_helper.c | 8 +++-
> include/drm/drm_modeset_helper_vtables.h | 48 ++++++++++++++++++++++++
> 2 files changed, 54 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/gpu/drm/drm_atomic_helper.c b/drivers/gpu/drm/drm_atomic_helper.c
> index 553415fe8ede..ccf01831f265 100644
> --- a/drivers/gpu/drm/drm_atomic_helper.c
> +++ b/drivers/gpu/drm/drm_atomic_helper.c
> @@ -999,7 +999,9 @@ disable_outputs(struct drm_device *dev, struct drm_atomic_state *old_state)
>
> /* Right function depends upon target state. */
> if (funcs) {
> - if (new_conn_state->crtc && funcs->prepare)
> + if (funcs->atomic_disable)
> + funcs->atomic_disable(encoder, old_state);
> + else if (new_conn_state->crtc && funcs->prepare)
> funcs->prepare(encoder);
> else if (funcs->disable)
> funcs->disable(encoder);
> @@ -1309,7 +1311,9 @@ void drm_atomic_helper_commit_modeset_enables(struct drm_device *dev,
> drm_bridge_pre_enable(encoder->bridge);
>
> if (funcs) {
> - if (funcs->enable)
> + if (funcs->atomic_enable)
> + funcs->atomic_enable(encoder, old_state);
> + else if (funcs->enable)
> funcs->enable(encoder);
> else if (funcs->commit)
> funcs->commit(encoder);
> diff --git a/include/drm/drm_modeset_helper_vtables.h b/include/drm/drm_modeset_helper_vtables.h
> index 8f3602811eb5..aa509c107083 100644
> --- a/include/drm/drm_modeset_helper_vtables.h
> +++ b/include/drm/drm_modeset_helper_vtables.h
> @@ -675,6 +675,51 @@ struct drm_encoder_helper_funcs {
> enum drm_connector_status (*detect)(struct drm_encoder *encoder,
> struct drm_connector *connector);
>
> + /**
> + * @atomic_disable:
> + *
> + * This callback should be used to disable the encoder. With the atomic
> + * drivers it is called before this encoder's CRTC has been shut off
> + * using their own &drm_crtc_helper_funcs.atomic_disable hook. If that
> + * sequence is too simple drivers can just add their own driver private
> + * encoder hooks and call them from CRTC's callback by looping over all
> + * encoders connected to it using for_each_encoder_on_crtc().
> + *
> + * This callback is a variant of @disable that provides the atomic state
> + * to the driver. It takes priority over @disable during atomic commits.
> + *
> + * This hook is used only by atomic helpers. Atomic drivers don't need
> + * to implement it if there's no need to disable anything at the encoder
> + * level. To ensure that runtime PM handling (using either DPMS or the
> + * new "ACTIVE" property) works @atomic_disable must be the inverse of
> + * @atomic_enable.
> + */
> + void (*atomic_disable)(struct drm_encoder *encoder,
> + struct drm_atomic_state *state);
> +
> + /**
> + * @atomic_enable:
> + *
> + * This callback should be used to enable the encoder. It is called
> + * after this encoder's CRTC has been enabled using their own
> + * &drm_crtc_helper_funcs.atomic_enable hook. If that sequence is
> + * too simple drivers can just add their own driver private encoder
> + * hooks and call them from CRTC's callback by looping over all encoders
> + * connected to it using for_each_encoder_on_crtc().
> + *
> + * This callback is a variant of @enable that provides the atomic state
> + * to the driver. It is called in place of @enable during atomic
> + * commits.
> + *
> + * This hook is used only by atomic helpers, for symmetry with @disable.
> + * Atomic drivers don't need to implement it if there's no need to
> + * enable anything at the encoder level. To ensure that runtime PM
> + * handling (using either DPMS or the new "ACTIVE" property) works
> + * @enable must be the inverse of @disable for atomic drivers.
> + */
> + void (*atomic_enable)(struct drm_encoder *encoder,
> + struct drm_atomic_state *state);
> +
> /**
> * @disable:
> *
> @@ -691,6 +736,9 @@ struct drm_encoder_helper_funcs {
> * handling (using either DPMS or the new "ACTIVE" property) works
> * @disable must be the inverse of @enable for atomic drivers.
> *
> + * For atomic drivers also consider @atomic_disable and save yourself
> + * from having to read the NOTE below!
> + *
> * NOTE:
> *
> * With legacy CRTC helpers there's a big semantic difference between
> --
> Sean Paul, Software Engineer, Google / Chromium OS
>

--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch

\
 
 \ /
  Last update: 2019-05-08 18:31    [W:0.042 / U:2.456 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site