lkml.org 
[lkml]   [2019]   [May]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[v1 3/4] arm64: ls1028aqds: Add support DP nodes for LS1028AQDS
Date
This patch add HDP PHY Controller related nodes on the LS1028AQDS.
Now LS1028AQDS on DP has following features:
- Supports 4 dp lane channel and lane mapping is 1-0-3-2.
- By default, the pixel link rate value's 27Mhz.
- By default, support the resoluions are 4k@60,1080p@60,720p@60,
480p@60. also user can specify any combination of monitor supported
resoluions by written in the node 'resoluion'.
- By default, the edid function is not in use.

Signed-off-by: Alison Wang <alison.wang@nxp.com>
Signed-off-by: Wen He <wen.he_1@nxp.com>
---
arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts | 12 ++++++++++++
1 file changed, 12 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
index b359068d9605..c8a92d4c4964 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
@@ -153,3 +153,15 @@
&sai1 {
status = "okay";
};
+
+&hdp {
+ fsl,no_edid;
+ resolution = "3840x2160@60",
+ "1920x1080@60",
+ "1280x720@60",
+ "720x480@60";
+ lane_mapping = <0x4e>;
+ edp_link_rate = <0x6>;
+ edp_num_lanes = <0x4>;
+ status = "okay";
+};
--
2.17.1
\
 
 \ /
  Last update: 2019-05-08 12:37    [W:0.063 / U:0.452 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site