lkml.org 
[lkml]   [2019]   [May]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] usb: core: verify devicetree nodes for disabled interfaces
From
Date
Hi

On 2019-05-07 15:24, Måns Rullgård wrote:
> Marek Szyprowski <m.szyprowski@samsung.com> writes:
>> Commit 01fdf179f4b0 ("usb: core: skip interfaces disabled in devicetree")
>> add support for disabling given USB device interface by adding nodes to
>> the USB host controller device. The mentioned commit however identifies
>> the given USB interface node only by the 'reg' property in the host
>> controller children nodes and then checks for their the 'status'. The USB
>> device interface nodes however also has to have a 'compatible' property as
>> described in Documentation/devicetree/bindings/usb/usb-device.txt. This is
>> important, because USB host controller might have child-nodes for other
>> purposes. For example, Exynos EHCI and OHCI drivers already define
>> child-nodes for each physical root hub port and assigns respective PHY
>> controller and parameters for them. This conflicts with the proposed
>> approach and verifying for the presence of the compatible property fixes
>> this issue without changing the devicetree bindings and the way the PHY
>> controllers are handled by Exynos EHCI/OHCI drivers.
>>
>> Reported-by: Markus Reichl <m.reichl@fivetechno.de>
>> Fixes: 01fdf179f4b0 ("usb: core: skip interfaces disabled in devicetree")
>> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
>> ---
>> drivers/usb/core/message.c | 1 +
>> 1 file changed, 1 insertion(+)
>>
>> diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
>> index 82239f27c4cc..cd455c4add25 100644
>> --- a/drivers/usb/core/message.c
>> +++ b/drivers/usb/core/message.c
>> @@ -2007,6 +2007,7 @@ int usb_set_configuration(struct usb_device *dev, int configuration)
>> struct usb_interface *intf = cp->interface[i];
>>
>> if (intf->dev.of_node &&
>> + of_device_is_compatible(intf->dev.of_node, NULL) &&
>> !of_device_is_available(intf->dev.of_node)) {
>> dev_info(&dev->dev, "skipping disabled interface %d\n",
>> intf->cur_altsetting->desc.bInterfaceNumber);
>> --
> This doesn't look right. of_device_is_compatible() with a NULL compat
> argument always returns zero.

Right, my fault. I missed that. of_find_property(intf->dev.of_node,
"compatible", NULL) is the correct check.


> There also seems to be a broader incompatibility between the generic USB
> bindings and the use of child nodes in the Exynos bindings.

True, but frankly I have no idea how to fix this in a better way.

Exynos EHCI/OHCI bindings predates the generic USB device bindings and
now we can only mitigate the damage caused by this conflict.

Best regards
--
Marek Szyprowski, PhD
Samsung R&D Institute Poland

\
 
 \ /
  Last update: 2019-05-08 12:14    [W:0.070 / U:0.788 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site