Messages in this thread | | | Date | Tue, 7 May 2019 11:42:27 +0200 | From | Ondřej Jirman <> | Subject | Re: [PATCH] arm64: dts: allwinner: h6: Enable HDMI output on orangepi 3 |
| |
Hi Yangtao,
On Sat, Apr 20, 2019 at 10:52:40AM -0400, Yangtao Li wrote: > Orangepi 3 has HDMI type A connector.
It also has DDC-IO-EN, whithout which HDMI will not work as expected by most users.
I'm working on a proper solution (discussion here):
https://lkml.org/lkml/2019/4/26/910
regards, o.
> Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> > --- > rebase: > sunxi/dt64-for-5.2 arm64: dts: allwinner: a64-amarula-relic: Add OV5640 > camera node > --- > .../dts/allwinner/sun50i-h6-orangepi-3.dts | 25 +++++++++++++++++++ > 1 file changed, 25 insertions(+) > > diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts > index 17d496990108..6ed3a1ee297d 100644 > --- a/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts > +++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts > @@ -21,6 +21,17 @@ > stdout-path = "serial0:115200n8"; > }; > > + connector { > + compatible = "hdmi-connector"; > + type = "a"; > + > + port { > + hdmi_con_in: endpoint { > + remote-endpoint = <&hdmi_out_con>; > + }; > + }; > + }; > + > leds { > compatible = "gpio-leds"; > > @@ -50,6 +61,10 @@ > cpu-supply = <®_dcdca>; > }; > > +&de { > + status = "okay"; > +}; > + > &ehci0 { > status = "okay"; > }; > @@ -58,6 +73,16 @@ > status = "okay"; > }; > > +&hdmi { > + status = "okay"; > +}; > + > +&hdmi_out { > + hdmi_out_con: endpoint { > + remote-endpoint = <&hdmi_con_in>; > + }; > +}; > + > &mmc0 { > vmmc-supply = <®_cldo1>; > cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ > -- > 2.17.0 > > > _______________________________________________ > linux-arm-kernel mailing list > linux-arm-kernel@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
| |