lkml.org 
[lkml]   [2019]   [May]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    From
    Subject[PATCH v3 00/14] add ecspi ERR009165 for i.mx6/7 soc family
    Date
      There is ecspi ERR009165 on i.mx6/7 soc family, which cause FIFO
    transfer to be send twice in DMA mode. Please get more information from:
    https://www.nxp.com/docs/en/errata/IMX6DQCE.pdf. The workaround is adding
    new sdma ram script which works in XCH mode as PIO inside sdma instead
    of SMC mode, meanwhile, 'TX_THRESHOLD' should be 0. The issue should be
    exist on all legacy i.mx6/7 soc family before i.mx6ul.
    NXP fix this design issue from i.mx6ul, so newer chips including i.mx6ul/
    6ull/6sll do not need this workaroud anymore. All other i.mx6/7/8 chips
    still need this workaroud. This patch set add new 'fsl,imx6ul-ecspi'
    for ecspi driver and 'ecspi_fixed' in sdma driver to choose if need errata
    or not.
    The first two reverted patches should be the same issue, though, it
    seems 'fixed' by changing to other shp script. Hope Sean or Sascha could
    have the chance to test this patch set if could fix their issues.
    Besides, enable sdma support for i.mx8mm/8mq and fix ecspi1 not work
    on i.mx8mm because the event id is zero.

    PS:
    Please get sdma firmware from below linux-firmware and copy it to your
    local rootfs /lib/firmware/imx/sdma.
    https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/tree/imx/sdma

    v2:
    1. add commit log for reverted patches.
    2. add comment for 'ecspi_fixed' in sdma driver.
    3. add 'fsl,imx6sll-ecspi' compatible instead of 'fsl,imx6ul-ecspi'
    rather than remove.
    v3:
    1. confirm with design team make sure ERR009165 fixed on i.mx6ul/i.mx6ull
    /i.mx6sll, not fixed on i.mx8m/8mm and other i.mx6/7 legacy chips.
    Correct dts related dts patch in v2.
    2. clean eratta information in binding doc and new 'tx_glitch_fixed' flag
    in spi-imx driver to state ERR009165 fixed or not.
    3. Enlarge burst size to fifo size for tx since tx_wml set to 0 in the
    errata workaroud, thus improve performance as possible.

    Robin Gong (14):
    Revert "ARM: dts: imx6q: Use correct SDMA script for SPI5 core"
    Revert "ARM: dts: imx6: Use correct SDMA script for SPI cores"
    Revert "dmaengine: imx-sdma: refine to load context only once"
    dmaengine: imx-sdma: remove dupilicated sdma_load_context
    dmaengine: imx-sdma: add mcu_2_ecspi script
    spi: imx: fix ERR009165
    spi: imx: remove ERR009165 workaround on i.mx6ul
    dt-bindings: spi: imx: add new i.mx6ul compatible name
    dmaengine: imx-sdma: remove ERR009165 on i.mx6ul
    dt-bindings: dma: imx-sdma: add i.mx6ul/6sx compatible name
    dmaengine: imx-sdma: fix ecspi1 rx dma not work on i.mx8mm
    ARM: dts: imx6ul: add dma support on ecspi
    ARM: dts: imx6sll: correct sdma compatible
    arm64: defconfig: Enable SDMA on i.mx8mq/8mm

    .../devicetree/bindings/dma/fsl-imx-sdma.txt | 2 +
    .../devicetree/bindings/spi/fsl-imx-cspi.txt | 1 +
    arch/arm/boot/dts/imx6q.dtsi | 2 +-
    arch/arm/boot/dts/imx6qdl.dtsi | 8 +--
    arch/arm/boot/dts/imx6sll.dtsi | 2 +-
    arch/arm/boot/dts/imx6ul.dtsi | 8 +++
    arch/arm64/configs/defconfig | 3 +
    drivers/dma/imx-sdma.c | 78 ++++++++++++++++------
    drivers/spi/spi-imx.c | 61 ++++++++++++++---
    include/linux/platform_data/dma-imx-sdma.h | 1 +
    10 files changed, 132 insertions(+), 34 deletions(-)

    --
    2.7.4

    \
     
     \ /
      Last update: 2019-05-07 11:16    [W:4.061 / U:0.064 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site