lkml.org 
[lkml]   [2019]   [May]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [v3 3/3] drm/mediatek: add mt8183 dpi support
From
Date
Hi, Jitao:

On Tue, 2019-04-16 at 13:52 +0800, Jitao Shi wrote:

I need the commit message. Even though the code is easy to understand,
words for this patch is still necessary.

Regards,
CK

> Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
> ---
> drivers/gpu/drm/mediatek/mtk_dpi.c | 19 +++++++++++++++++++
> 1 file changed, 19 insertions(+)
>
> diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c b/drivers/gpu/drm/mediatek/mtk_dpi.c
> index 66405159141a..fbb087218775 100644
> --- a/drivers/gpu/drm/mediatek/mtk_dpi.c
> +++ b/drivers/gpu/drm/mediatek/mtk_dpi.c
> @@ -681,6 +681,16 @@ static unsigned int mt2701_calculate_factor(int clock)
> return 2;
> }
>
> +static unsigned int mt8183_calculate_factor(int clock)
> +{
> + if (clock <= 27000)
> + return 8;
> + else if (clock <= 167000)
> + return 4;
> + else
> + return 2;
> +}
> +
> static const struct mtk_dpi_conf mt8173_conf = {
> .cal_factor = mt8173_calculate_factor,
> .reg_h_fre_con = 0xe0,
> @@ -692,6 +702,12 @@ static const struct mtk_dpi_conf mt2701_conf = {
> .edge_sel_en = true,
> };
>
> +static const struct mtk_dpi_conf mt8183_conf = {
> + .cal_factor = mt8183_calculate_factor,
> + .reg_h_fre_con = 0xe0,
> + .dual_edge = true,
> +};
> +
> static int mtk_dpi_probe(struct platform_device *pdev)
> {
> struct device *dev = &pdev->dev;
> @@ -787,6 +803,9 @@ static const struct of_device_id mtk_dpi_of_ids[] = {
> { .compatible = "mediatek,mt8173-dpi",
> .data = &mt8173_conf,
> },
> + { .compatible = "mediatek,mt8183-dpi",
> + .data = &mt8183_conf,
> + },
> { },
> };
>


\
 
 \ /
  Last update: 2019-05-07 09:42    [W:0.073 / U:23.980 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site