Messages in this thread Patch in this message | | | From | Dan Murphy <> | Subject | [PATCH v4 1/6] regulator: lm363x: Make the gpio register enable flexible | Date | Tue, 7 May 2019 15:11:54 -0500 |
| |
The use of and enablement of the GPIO can be used across devices. Use the enable_reg in the regulator descriptor for the register to write.
Signed-off-by: Dan Murphy <dmurphy@ti.com> --- drivers/regulator/lm363x-regulator.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/regulator/lm363x-regulator.c b/drivers/regulator/lm363x-regulator.c index c876e161052a..382b1cecdd93 100644 --- a/drivers/regulator/lm363x-regulator.c +++ b/drivers/regulator/lm363x-regulator.c @@ -263,8 +263,8 @@ static int lm363x_regulator_probe(struct platform_device *pdev) if (gpiod) { cfg.ena_gpiod = gpiod; - - ret = regmap_update_bits(regmap, LM3632_REG_BIAS_CONFIG, + ret = regmap_update_bits(regmap, + lm363x_regulator_desc[id].enable_reg, LM3632_EXT_EN_MASK, LM3632_EXT_EN_MASK); if (ret) { -- 2.21.0.5.gaeb582a983
| |