lkml.org 
[lkml]   [2019]   [May]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 3/3] hwmon: scmi: Scale values to target desired HWMON units
Date
If the SCMI firmware implementation is reporting values in a scale that
is different from the HWMON units, we need to scale up or down the value
according to how far appart they are.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
drivers/hwmon/scmi-hwmon.c | 30 +++++++++++++++++++++++++++++-
1 file changed, 29 insertions(+), 1 deletion(-)

diff --git a/drivers/hwmon/scmi-hwmon.c b/drivers/hwmon/scmi-hwmon.c
index a80183a488c5..5c244053efc8 100644
--- a/drivers/hwmon/scmi-hwmon.c
+++ b/drivers/hwmon/scmi-hwmon.c
@@ -18,6 +18,34 @@ struct scmi_sensors {
const struct scmi_sensor_info **info[hwmon_max];
};

+static u64 scmi_hwmon_scale(const struct scmi_sensor_info *sensor, u64 value)
+{
+ s8 scale = sensor->scale;
+ unsigned long long f;
+
+ switch (sensor->type) {
+ case TEMPERATURE_C:
+ case VOLTAGE:
+ case CURRENT:
+ scale += 3;
+ break;
+ case POWER:
+ case ENERGY:
+ scale += 6;
+ break;
+ default:
+ break;
+ }
+
+ __pow10(abs(scale), f);
+ if (scale > 0)
+ value *= f;
+ else
+ do_div(value, f);
+
+ return value;
+}
+
static int scmi_hwmon_read(struct device *dev, enum hwmon_sensor_types type,
u32 attr, int channel, long *val)
{
@@ -30,7 +58,7 @@ static int scmi_hwmon_read(struct device *dev, enum hwmon_sensor_types type,
sensor = *(scmi_sensors->info[type] + channel);
ret = h->sensor_ops->reading_get(h, sensor->id, false, &value);
if (!ret)
- *val = value;
+ *val = scmi_hwmon_scale(sensor, value);

return ret;
}
--
2.17.1
\
 
 \ /
  Last update: 2019-05-07 21:40    [W:0.074 / U:0.048 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site