lkml.org 
[lkml]   [2019]   [May]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v4 13/16] platform/x86: intel_cht_int33fe: Provide software nodes for the devices
From
Date
Hi,

On 5/22/19 12:51 PM, Heikki Krogerus wrote:
> Software nodes provide two features that we will need later.
> 1) Software nodes can have references to other software nodes.
> 2) Software nodes can exist before a device entry is created.
>
> Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
> ---
> drivers/platform/x86/intel_cht_int33fe.c | 53 ++++++++++++++++++++----
> 1 file changed, 45 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/platform/x86/intel_cht_int33fe.c b/drivers/platform/x86/intel_cht_int33fe.c
> index 4ab47d6df413..a4ebd1d6b5b6 100644
> --- a/drivers/platform/x86/intel_cht_int33fe.c
> +++ b/drivers/platform/x86/intel_cht_int33fe.c
> @@ -27,6 +27,13 @@
>
> #define EXPECTED_PTYPE 4
>
> +enum {
> + INT33FE_NODE_FUSB302,
> + INT33FE_NODE_MAX17047,
> + INT33FE_NODE_PI3USB30532,
> + INT33FE_NODE_MAX,
> +};
> +
> struct cht_int33fe_data {
> struct i2c_client *max17047;
> struct i2c_client *fusb302;
> @@ -72,8 +79,13 @@ static const struct property_entry max17047_props[] = {
>
> static const struct property_entry fusb302_props[] = {
> PROPERTY_ENTRY_STRING("linux,extcon-name", "cht_wcove_pwrsrc"),
> - PROPERTY_ENTRY_U32("fcs,max-sink-microvolt", 12000000),
> - PROPERTY_ENTRY_U32("fcs,max-sink-microamp", 3000000),
> + { }
> +};
> +
> +static const struct software_node nodes[] = {
> + { "fusb302", NULL, fusb302_props },
> + { "max17047", NULL, max17047_props },
> + { "pi3usb30532" },
> { }
> };
>
> @@ -82,14 +94,17 @@ cht_int33fe_register_max17047(struct device *dev, struct cht_int33fe_data *data)
> {
> struct i2c_client *max17047 = NULL;
> struct i2c_board_info board_info;
> + struct fwnode_handle *fwnode;
> int ret;
>
> + fwnode = software_node_fwnode(&nodes[INT33FE_NODE_MAX17047]);
> + if (!fwnode)
> + return -ENODEV;
> +
> i2c_for_each_dev(&max17047, cht_int33fe_check_for_max17047);
> if (max17047) {
> /* Pre-existing i2c-client for the max17047, add device-props */
> - ret = device_add_properties(&max17047->dev, max17047_props);
> - if (ret)
> - return ret;
> + max17047->dev.fwnode->secondary = fwnode;

I believe that you should do:
fwnode->secondary = ERR_PTR(-ENODEV);
cht_int33fe_setup_dp
Before this call, as you are doing in the cht_int33fe_setup_dp function.

Regards,

Hans


> /* And re-probe to get the new device-props applied. */
> ret = device_reprobe(&max17047->dev);
> if (ret)
> @@ -100,7 +115,7 @@ cht_int33fe_register_max17047(struct device *dev, struct cht_int33fe_data *data)
> memset(&board_info, 0, sizeof(board_info));
> strlcpy(board_info.type, "max17047", I2C_NAME_SIZE);
> board_info.dev_name = "max17047";
> - board_info.properties = max17047_props;
> + board_info.fwnode = fwnode;
> data->max17047 = i2c_acpi_new_device(dev, 1, &board_info);
>
> return PTR_ERR_OR_ZERO(data->max17047);
> @@ -111,6 +126,7 @@ static int cht_int33fe_probe(struct platform_device *pdev)
> struct device *dev = &pdev->dev;
> struct i2c_board_info board_info;
> struct cht_int33fe_data *data;
> + struct fwnode_handle *fwnode;
> struct regulator *regulator;
> unsigned long long ptyp;
> acpi_status status;
> @@ -170,10 +186,14 @@ static int cht_int33fe_probe(struct platform_device *pdev)
> if (!data)
> return -ENOMEM;
>
> + ret = software_node_register_nodes(nodes);
> + if (ret)
> + return ret;
> +
> /* Work around BIOS bug, see comment on cht_int33fe_check_for_max17047 */
> ret = cht_int33fe_register_max17047(dev, data);
> if (ret)
> - return ret;
> + goto out_remove_nodes;
>
> data->connections[0].endpoint[0] = "port0";
> data->connections[0].endpoint[1] = "i2c-pi3usb30532-switch";
> @@ -187,10 +207,16 @@ static int cht_int33fe_probe(struct platform_device *pdev)
>
> device_connections_add(data->connections);
>
> + fwnode = software_node_fwnode(&nodes[INT33FE_NODE_FUSB302]);
> + if (!fwnode) {
> + ret = -ENODEV;
> + goto out_unregister_max17047;
> + }
> +
> memset(&board_info, 0, sizeof(board_info));
> strlcpy(board_info.type, "typec_fusb302", I2C_NAME_SIZE);
> board_info.dev_name = "fusb302";
> - board_info.properties = fusb302_props;
> + board_info.fwnode = fwnode;
> board_info.irq = fusb302_irq;
>
> data->fusb302 = i2c_acpi_new_device(dev, 2, &board_info);
> @@ -199,8 +225,15 @@ static int cht_int33fe_probe(struct platform_device *pdev)
> goto out_unregister_max17047;
> }
>
> + fwnode = software_node_fwnode(&nodes[INT33FE_NODE_PI3USB30532]);
> + if (!fwnode) {
> + ret = -ENODEV;
> + goto out_unregister_fusb302;
> + }
> +
> memset(&board_info, 0, sizeof(board_info));
> board_info.dev_name = "pi3usb30532";
> + board_info.fwnode = fwnode;
> strlcpy(board_info.type, "pi3usb30532", I2C_NAME_SIZE);
>
> data->pi3usb30532 = i2c_acpi_new_device(dev, 3, &board_info);
> @@ -221,6 +254,9 @@ static int cht_int33fe_probe(struct platform_device *pdev)
>
> device_connections_remove(data->connections);
>
> +out_remove_nodes:
> + software_node_unregister_nodes(nodes);
> +
> return ret;
> }
>
> @@ -233,6 +269,7 @@ static int cht_int33fe_remove(struct platform_device *pdev)
> i2c_unregister_device(data->max17047);
>
> device_connections_remove(data->connections);
> + software_node_unregister_nodes(nodes);
>
> return 0;
> }
>

\
 
 \ /
  Last update: 2019-05-29 11:31    [W:0.248 / U:0.128 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site