lkml.org 
[lkml]   [2019]   [May]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCHv6 0/4] omapdrm: DSI command mode panel support
From
Date
On 28/05/2019 13:18, Tony Lindgren wrote:

>> This change lets me boot. I don't know that's the correct place, though:
>>
>> diff --git a/arch/arm/boot/dts/am5728.dtsi b/arch/arm/boot/dts/am5728.dtsi
>> index 82e5427ef6a9..c778f9a86b3a 100644
>> --- a/arch/arm/boot/dts/am5728.dtsi
>> +++ b/arch/arm/boot/dts/am5728.dtsi
>> @@ -31,3 +31,7 @@
>> &atl_tm {
>> status = "disabled";
>> };
>> +
>> +&timer12 {
>> + status = "disabled";
>> +};
>
> OK we should disable it at the target-module level though. Interesting
> that reading the revision register works with the above, or maybe you
> still get some warning?

I don't see anything odd in the boot log with the above change. At least
no kernel WARNs, nor anything with grepping "timer", "err", or "warn".

I just verified with clean 5.2-rc2, that it doesn't boot, and with the
above change, boots.

>> My board is x15 rev A3, attached to AM5 EVM. I've also attached my kernel
>> config.
>
> Strange that this is not affecting other x15? I think timer12 would
> be blocked on HS devices though?

I don't know... I can't believe my x15 would be unique =). Can it be
something in the kernel config? u-boot?

Peter should have the same A3. Peter, can you try with my config?

Tomi

--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

\
 
 \ /
  Last update: 2019-05-28 12:33    [W:0.102 / U:0.788 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site