lkml.org 
[lkml]   [2019]   [May]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 0/2] net: macb: Add support for SiFive FU540-C000
On Mon, May 27, 2019 at 1:34 PM Andreas Schwab <schwab@suse.de> wrote:
>
> On Mai 24 2019, Yash Shah <yash.shah@sifive.com> wrote:
>
> > Hi Andreas,
> >
> > On Thu, May 23, 2019 at 6:19 PM Andreas Schwab <schwab@suse.de> wrote:
> >>
> >> On Mai 23 2019, Yash Shah <yash.shah@sifive.com> wrote:
> >>
> >> > On FU540, the management IP block is tightly coupled with the Cadence
> >> > MACB IP block. It manages many of the boundary signals from the MACB IP
> >> > This patchset controls the tx_clk input signal to the MACB IP. It
> >> > switches between the local TX clock (125MHz) and PHY TX clocks. This
> >> > is necessary to toggle between 1Gb and 100/10Mb speeds.
> >>
> >> Doesn't work for me:
> >>
> >> [ 365.842801] macb: probe of 10090000.ethernet failed with error -17
> >>
> >
> > Make sure you have applied all the patches needed for testing found at
> > dev/yashs/ethernet branch of:
>
> Nope, try reloading the module.

Yes, I could see the error on reloading the module.
Thanks for the catch. I will fix this in the next version of this patch.

- Yash

\
 
 \ /
  Last update: 2022-09-17 16:06    [W:0.180 / U:0.096 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site