lkml.org 
[lkml]   [2019]   [May]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    From
    Subject[PATCH v6 0/6] Add support for Orange Pi 3
    Date
    From: Ondrej Jirman <megous@megous.com>

    This series implements support for Xunlong Orange Pi 3 board.

    Unfortunately, this board needs some small driver patches, so I have
    split the boards DT patch into chunks that require patches for drivers
    in various subsystems.

    Suggested merging plan/dependencies:

    - stmmac patches are needed for ethernet support (patches 1-3)
    - these should be ready now
    - HDMI support (patches 4-6)
    - should be ready

    Changes in v2:
    - added dt-bindings documentation for the board's compatible string
    (suggested by Clement)
    - addressed checkpatch warnings and code formatting issues (on Maxime's
    suggestions)
    - stmmac: dropped useless parenthesis, reworded description of the patch
    (suggested by Sergei)
    - drop useles dev_info() about the selected io bias voltage
    - docummented io voltage bias selection variant macros
    - wifi: marked WiFi DTS patch and realted mmc1_pins as "DO NOT MERGE",
    because wifi depends on H6 RTC support that's not merged yet (suggested
    by Clement)
    - added missing signed-of-bys
    - changed &usb2otg dr_mode to otg, and added a note about VBUS
    - improved wording of HDMI driver's DDC power supply patch

    Changes in v3:
    - dropped already applied patches
    - changed pinctrl I/O bias selection constants to enum and renamed
    - added /omit-if-no-ref/ to mmc1_pins
    - made mmc1_pins default pinconf for mmc1 in H6 dtsi
    - move ddc-supply to HDMI connector node, updated patch descriptions,
    changed dt-bindings docs

    Changes in v4:
    - fix checkpatch warnings/style issues
    - use enum in struct sunxi_desc_function for io_bias_cfg_variant
    - collected acked-by's
    - fix compile error in drivers/pinctrl/sunxi/pinctrl-sun9i-a80-r.c:156
    caused by missing conversion from has_io_bias_cfg struct member
    (I've kept the acked-by, because it's a trivial change, but feel free
    to object.) (reported by Martin A. on github)
    I did not have A80 pinctrl enabled for some reason, so I did not catch
    this sooner.
    - dropped brcm firmware patch (was already applied)
    - dropped the wifi dts patch (will re-send after H6 RTC gets merged,
    along with bluetooth support, in a separate series)

    Changes in v5:
    - dropped already applied patches (pinctrl patches, mmc1 pinconf patch)
    - rename GMAC-3V3 -> GMAC-3V to match the schematic (Jagan)
    - changed hdmi-connector's ddc-supply property to ddc-en-gpios
    (Rob Herring)

    Changes in v6:
    - added dt-bindings reviewed-by tag
    - fix wording in stmmac commit (as suggested by Sergei)

    Please take a look.

    thank you and regards,
    Ondrej Jirman

    Icenowy Zheng (2):
    net: stmmac: sun8i: add support for Allwinner H6 EMAC
    net: stmmac: sun8i: force select external PHY when no internal one

    Ondrej Jirman (4):
    arm64: dts: allwinner: orange-pi-3: Enable ethernet
    dt-bindings: display: hdmi-connector: Support DDC bus enable
    drm: sun4i: Add support for enabling DDC I2C bus to sun8i_dw_hdmi glue
    arm64: dts: allwinner: orange-pi-3: Enable HDMI output

    .../display/connector/hdmi-connector.txt | 1 +
    .../dts/allwinner/sun50i-h6-orangepi-3.dts | 70 +++++++++++++++++++
    drivers/gpu/drm/sun4i/sun8i_dw_hdmi.c | 55 ++++++++++++++-
    drivers/gpu/drm/sun4i/sun8i_dw_hdmi.h | 3 +
    .../net/ethernet/stmicro/stmmac/dwmac-sun8i.c | 21 ++++++
    5 files changed, 147 insertions(+), 3 deletions(-)

    --
    2.21.0

    \
     
     \ /
      Last update: 2019-05-27 18:23    [W:2.124 / U:0.076 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site