lkml.org 
[lkml]   [2019]   [May]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v12 03/13] dt-bindings: Add doc for the Ingenic TCU drivers


Le ven. 24 mai 2019 à 22:21, Rob Herring <robh@kernel.org> a écrit :
> On Tue, May 21, 2019 at 04:51:31PM +0200, Paul Cercueil wrote:
>> Add documentation about how to properly use the Ingenic TCU
>> (Timer/Counter Unit) drivers from devicetree.
>>
>> Signed-off-by: Paul Cercueil <paul@crapouillou.net>
>> ---
>>
>> Notes:
>> v4: New patch in this series. Corresponds to V2 patches 3-4-5
>> with
>> added content.
>>
>> v5: - Edited PWM/watchdog DT bindings documentation to point to
>> the new
>> document.
>> - Moved main document to
>> Documentation/devicetree/bindings/timer/ingenic,tcu.txt
>> - Updated documentation to reflect the new devicetree bindings.
>>
>> v6: - Removed PWM/watchdog documentation files as asked by
>> upstream
>> - Removed doc about properties that should be implicit
>> - Removed doc about ingenic,timer-channel /
>> ingenic,clocksource-channel as they are gone
>> - Fix WDT clock name in the binding doc
>> - Fix lengths of register areas in watchdog/pwm nodes
>>
>> v7: No change
>>
>> v8: - Fix address of the PWM node
>> - Added doc about system timer and clocksource children nodes
>>
>> v9: - Remove doc about system timer and clocksource children
>> nodes...
>> - Add doc about ingenic,pwm-channels-mask property
>>
>> v10: No change
>>
>> v11: Fix info about default value of ingenic,pwm-channels-mask
>>
>> v12: Drop sub-nodes for now; they will be introduced in a
>> follow-up
>> patchset.
>
> Why? I believe I acked them.

The patchset was too big, and I've already been trying to get it
upstream for
more than one year now. So I cut it in half in hope that it'll be
easier to
upstream it that way.

>>
>> .../devicetree/bindings/timer/ingenic,tcu.txt | 59
>> +++++++++++++++++++
>> 1 file changed, 59 insertions(+)
>> create mode 100644
>> Documentation/devicetree/bindings/timer/ingenic,tcu.txt
>>
>> diff --git
>> a/Documentation/devicetree/bindings/timer/ingenic,tcu.txt
>> b/Documentation/devicetree/bindings/timer/ingenic,tcu.txt
>> new file mode 100644
>> index 000000000000..d101cd72c9b0
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/timer/ingenic,tcu.txt
>> @@ -0,0 +1,59 @@
>> +Ingenic JZ47xx SoCs Timer/Counter Unit devicetree bindings
>> +==========================================================
>> +
>> +For a description of the TCU hardware and drivers, have a look at
>> +Documentation/mips/ingenic-tcu.txt.
>> +
>> +Required properties:
>> +
>> +- compatible: Must be one of:
>> + * "ingenic,jz4740-tcu"
>> + * "ingenic,jz4725b-tcu"
>> + * "ingenic,jz4770-tcu"
>> +- reg: Should be the offset/length value corresponding to the TCU
>> registers
>> +- clocks: List of phandle & clock specifiers for clocks external
>> to the TCU.
>> + The "pclk", "rtc" and "ext" clocks should be provided. The "tcu"
>> clock
>> + should be provided if the SoC has it.
>> +- clock-names: List of name strings for the external clocks.
>> +- #clock-cells: Should be <1>;
>> + Clock consumers specify this argument to identify a clock. The
>> valid values
>> + may be found in <dt-bindings/clock/ingenic,tcu.h>.
>> +- interrupt-controller : Identifies the node as an interrupt
>> controller
>> +- #interrupt-cells : Specifies the number of cells needed to
>> encode an
>> + interrupt source. The value should be 1.
>> +- interrupt-parent : phandle of the interrupt controller.
>
> Drop this 'interrupt-parent' is implied and could be in a parent node.
>
>> +- interrupts : Specifies the interrupt the controller is connected
>> to.
>> +
>> +Optional properties:
>> +
>> +- ingenic,pwm-channels-mask: Bitmask of TCU channels reserved for
>> PWM use.
>> + Default value is 0xfc.
>> +
>> +
>> +Example
>> +==========================================================
>> +
>> +#include <dt-bindings/clock/jz4770-cgu.h>
>> +
>> +/ {
>> + tcu: timer@10002000 {
>> + compatible = "ingenic,jz4770-tcu";
>> + reg = <0x10002000 0x1000>;
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> + ranges = <0x0 0x10002000 0x1000>;
>> +
>> + #clock-cells = <1>;
>> +
>> + clocks = <&cgu JZ4770_CLK_RTC
>> + &cgu JZ4770_CLK_EXT
>> + &cgu JZ4770_CLK_PCLK>;
>> + clock-names = "rtc", "ext", "pclk";
>> +
>> + interrupt-controller;
>> + #interrupt-cells = <1>;
>> +
>> + interrupt-parent = <&intc>;
>> + interrupts = <27 26 25>;
>> + };
>> +};
>> --
>> 2.21.0.593.g511ec345e18
>>


\
 
 \ /
  Last update: 2019-05-25 21:14    [W:0.069 / U:1.496 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site