lkml.org 
[lkml]   [2019]   [May]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH v3 0/3] add thermal driver for h6
Date
This patchset add support for H6 thermal sensor.

BWY, do a cleanup in thermal makfile.

Yangtao Li (3):
thermal: sun8i: add thermal driver for h6
dt-bindings: thermal: add binding document for h6 thermal controller
thermal: fix indentation in makefile

.../bindings/thermal/sun8i-thermal.yaml | 71 +++
MAINTAINERS | 7 +
drivers/thermal/Kconfig | 14 +
drivers/thermal/Makefile | 9 +-
drivers/thermal/sun8i_thermal.c | 437 ++++++++++++++++++
5 files changed, 534 insertions(+), 4 deletions(-)
create mode 100644 Documentation/devicetree/bindings/thermal/sun8i-thermal.yaml
create mode 100644 drivers/thermal/sun8i_thermal.c

---
v3:
-Add a sun8i prefix to some function
-Remove disable callback and rename enable to init
-Remove clock enable, calibration from init callback
-Convert driver to interrupt based
-Convert doc to yaml file
---
2.17.0

\
 
 \ /
  Last update: 2019-05-25 20:14    [W:0.154 / U:0.056 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site