Messages in this thread | | | Date | Fri, 24 May 2019 14:13:59 +0200 | From | Torsten Duwe <> | Subject | Re: [PATCH 6/6] arm64: dts: allwinner: a64: enable ANX6345 bridge on Teres-I |
| |
On Thu, May 23, 2019 at 07:48:03AM -0700, Vasily Khoruzhick wrote: > On Wed, May 22, 2019 at 11:54 PM Torsten Duwe <duwe@lst.de> wrote: > > > > > > --- a/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts > > +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-teres-i.dts > > @@ -65,6 +65,21 @@ > > }; > > }; > > > > + panel: panel { > > + compatible ="innolux,n116bge", "simple-panel"; > > IIRC Rob wanted it to be edp-connector, not simple-panel. Also you > need to introduce edp-connector binding.
This line is identically found in arch/arm/boot/dts/rk3288-veyron-chromebook.dtsi and arch/arm64/boot/dts/nvidia/tegra132-norrin.dts
> > + status = "okay"; > > + power-supply = <®_dcdc1>; > > + backlight = <&backlight>; > > + > > + ports { > > + panel_in: port { > > + panel_in_edp: endpoint { > > + remote-endpoint = <&anx6345_out>; > > + }; > > + }; > > + };
The whole node is the same as in rk3288-veyron-chromebook.dtsi; I only adapted the power-supply and remote-endpoint properties.
Is there anything wrong with that?
Torsten
| |