lkml.org 
[lkml]   [2019]   [May]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH net-next v2 16/18] net: stmmac: dwxgmac2: Do not disable whole RX in dma_stop_rx()
Date
We don't need to disable the whole RX when dma_stop_rx() is called
because there may be the need of just disabling 1 DMA channel.

This is also needed for stmmac Flow Control selftest.

Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
---
drivers/net/ethernet/stmicro/stmmac/dwxgmac2_dma.c | 4 ----
1 file changed, 4 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_dma.c b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_dma.c
index e79037f511e1..7861a938420a 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_dma.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwxgmac2_dma.c
@@ -299,10 +299,6 @@ static void dwxgmac2_dma_stop_rx(void __iomem *ioaddr, u32 chan)
value = readl(ioaddr + XGMAC_DMA_CH_RX_CONTROL(chan));
value &= ~XGMAC_RXST;
writel(value, ioaddr + XGMAC_DMA_CH_RX_CONTROL(chan));
-
- value = readl(ioaddr + XGMAC_RX_CONFIG);
- value &= ~XGMAC_CONFIG_RE;
- writel(value, ioaddr + XGMAC_RX_CONFIG);
}

static int dwxgmac2_dma_interrupt(void __iomem *ioaddr,
--
2.7.4
\
 
 \ /
  Last update: 2019-05-24 10:24    [W:0.063 / U:0.292 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site