lkml.org 
[lkml]   [2019]   [May]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    SubjectRe: [PATCH v4 00/16] NVIDIA Tegra devfreq improvements and Tegra20/30 support
    From
    Date
    Hi Dmitry,

    On 19. 5. 2. 오전 8:37, Dmitry Osipenko wrote:
    > Changelog:
    >
    > v4: Addressed all review comments that were made by Chanwoo Choi to v3:
    >
    > - changed the driver removal order to match the probe exactly
    > - added clarifying comment for 1/8 ratio to the Tegra20 driver
    >
    > Chanwoo, please also note that the clk patch that should fix
    > compilation problem that was reported the kbuild-test-robot is already
    > applied and available in the recent linux-next.

    I knew that Stephen picked up your path about clock.

    >
    > v3: Addressed all review comments that were made by Chanwoo Choi to v2.
    >
    > Patch "Synchronize IRQ after masking it in hardware" morphed into
    > "Properly disable interrupts", which disables interrupts more solidly.
    >
    > Added new minor patch: "Rename tegra-devfreq.c to tegra30-devfreq.c".
    >
    > Added missed error handlings for dev_pm_opp_add().
    >
    > v2: The patchset was quite heavily reworked since v1, few patches we
    > dropped or squashed into the new ones and more patches we added.
    > In a result more bugs and potential problems are fixed now, driver's
    > code got more clean up.
    >
    > The Tegra20 driver-addition patch is now a part of this series, it has
    > no changes since v1.
    >
    > Dmitry Osipenko (16):
    > PM / devfreq: tegra: Fix kHz to Hz conversion
    > PM / devfreq: tegra: Replace readl-writel with relaxed versions
    > PM / devfreq: tegra: Replace write memory barrier with the read
    > barrier
    > PM / devfreq: tegra: Don't ignore clk errors
    > PM / devfreq: tegra: Don't set EMC clock rate to maximum on probe
    > PM / devfreq: tegra: Drop primary interrupt handler
    > PM / devfreq: tegra: Properly disable interrupts
    > PM / devfreq: tegra: Clean up driver's probe / remove
    > PM / devfreq: tegra: Avoid inconsistency of current frequency value
    > PM / devfreq: tegra: Mark ACTMON's governor as immutable
    > PM / devfreq: tegra: Move governor registration to driver's probe
    > PM / devfreq: tegra: Reconfigure hardware on governor's restart
    > PM / devfreq: tegra: Support Tegra30
    > PM / devfreq: tegra: Enable COMPILE_TEST for the driver
    > PM / devfreq: tegra: Rename tegra-devfreq.c to tegra30-devfreq.c
    > PM / devfreq: Introduce driver for NVIDIA Tegra20
    >
    > MAINTAINERS | 8 +
    > drivers/devfreq/Kconfig | 15 +-
    > drivers/devfreq/Makefile | 3 +-
    > drivers/devfreq/tegra20-devfreq.c | 212 ++++++++++++
    > .../{tegra-devfreq.c => tegra30-devfreq.c} | 315 ++++++++----------
    > 5 files changed, 379 insertions(+), 174 deletions(-)
    > create mode 100644 drivers/devfreq/tegra20-devfreq.c
    > rename drivers/devfreq/{tegra-devfreq.c => tegra30-devfreq.c} (81%)
    >


    --
    Best Regards,
    Chanwoo Choi
    Samsung Electronics

    \
     
     \ /
      Last update: 2019-05-03 02:31    [W:4.095 / U:0.024 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site