lkml.org 
[lkml]   [2019]   [Apr]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v2 2/2] dt-bindings: net: bluetooth: Add device property nvm-postfix for QCA6174
On Thu, Apr 4, 2019 at 7:32 AM Marc Gonzalez <marc.w.gonzalez@free.fr> wrote:
>
> +robh
>
> On 04/04/2019 11:08, Rocky Liao wrote:
>
> > This patchs patch adds an optional device property nvm-postfix to allow the
> > driver to load customized nvm file based on this property
>
> While text /before/ is indeed called a "prefix", text /after/ is not a "postfix",
> but a "suffix".
>
>
> > Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt | 2 ++
> > 1 file changed, 2 insertions(+)
> >
> > diff --git a/Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt b/Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt
> > index 824c0e2..70cda4b 100644
> > --- a/Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt
> > +++ b/Documentation/devicetree/bindings/net/qualcomm-bluetooth.txt
> > @@ -16,6 +16,7 @@ Optional properties for compatible string qcom,qca6174-bt:
> >
> > - enable-gpios: gpio specifier used to enable chip
> > - clocks: clock provided to the controller (SUSCLK_32KHZ)
> > + - nvm-postfix: nvm file postfix to load customized nvm file
>
> The device tree is supposed to describe hardware.
>
> The name of which file to load can hardly be considered part of the HW.
>
> Possible solutions:
> 1) derive the file name from the compatible string
> 2) pass the name as a module parameter
> 3) something else

Or use the 'firmware-name' property to define the full firmware filename.

Rob

\
 
 \ /
  Last update: 2019-04-09 15:55    [W:0.168 / U:2.860 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site