lkml.org 
[lkml]   [2019]   [Apr]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH 00/11] drm/meson: Add G12A Support
From
Date
Hi,

On 09/04/2019 10:42, Jerome Brunet wrote:
> On Mon, 2019-03-25 at 15:18 +0100, Neil Armstrong wrote:
>> The Amlogic G12A SoC offers very close Video Display
>> functionnalities with it's older GXBB, GXL & GXM predecessors.
>>
>> The main differences are :
>> - G12A Support now 3 "real" OSD planes with a new Blender module
>> - Instead of having a single Scaler for OSD1, G12A has two scaler
>> that can be applied to 2 out of the 3 OSD planes or on the outputs
>> of the blender module.
>> - The HDMI PHY now support RX-SENSE, Dynamic HDR and it's registers are
>> now memory mapped instead of using an internal bus.
>> - The VPU now support a DSI interface to connect a display, using
>> the Synopsys DSI controller and a custom PHY
>>
>> The complex Blender routing, HDMI RX-SENSE, Dynamic HDR and DSI support
>> are not handled in this patchset.
>>
>> This patchset implements on-par support with the currently support
>> GXBB, GXL and GXM SoCs. There is no support delta with this patchset.
>>
>> patch 10 & 11 implements the bindings found at [1].
>>
>> [1] https://lkml.kernel.org/r/20190313141030.5958-1-narmstrong@baylibre.com
>>
>> Neil Armstrong (11):
>> drm/meson: Switch PLL to 5.94GHz base for 297Mhz pixel clock
>> drm/meson: Add registers for G12A SoC
>> drm/meson: Add G12A Support for VPP setup
>> drm/meson: Add G12A Support for VIU setup
>> drm/meson: Add G12A support for OSD1 Plane
>> drm/meson: Add G12A Support for the Overlay video plane
>> drm/meson: Add G12A support for plane handling in CRTC driver
>> drm/meson: Add G12A support for CVBS Encoer
>> drm/meson: Add G12A Video Clock setup
>> drm/meson: Add G12A compatible
>> drm/meson: Add G12A support for the DW-HDMI Glue
>>
>> drivers/gpu/drm/meson/meson_crtc.c | 269 +++++++++++++++++++-----
>> drivers/gpu/drm/meson/meson_drv.c | 1 +
>> drivers/gpu/drm/meson/meson_drv.h | 4 +
>> drivers/gpu/drm/meson/meson_dw_hdmi.c | 163 +++++++++++---
>> drivers/gpu/drm/meson/meson_dw_hdmi.h | 32 ++-
>> drivers/gpu/drm/meson/meson_overlay.c | 10 +-
>> drivers/gpu/drm/meson/meson_plane.c | 15 +-
>> drivers/gpu/drm/meson/meson_registers.h | 247 ++++++++++++++++++++++
>> drivers/gpu/drm/meson/meson_vclk.c | 123 +++++++++--
>> drivers/gpu/drm/meson/meson_venc.c | 11 +-
>> drivers/gpu/drm/meson/meson_venc_cvbs.c | 25 ++-
>> drivers/gpu/drm/meson/meson_viu.c | 72 ++++++-
>> drivers/gpu/drm/meson/meson_vpp.c | 51 +++--
>> 13 files changed, 880 insertions(+), 143 deletions(-)
>>
>
> on the u200 and sei510
> Tested-by: Jerome Brunet <jbrunet@baylibre.com>
>
> I can't pretend to have a deep understanding of this subsystem, but as far as
> I can tell, there is nothing crazy in there. With the comments around the use
> of constants and defines fixed, you can add
>
> Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>
>
> As a possible future enhancement, it would be nice if you could trim the use
> of *_is_compatible() functions. I think it would make the code easier to
> follow and review.
>

Thanks for the overall review,

I will do a complete fixup of the constants and defines in a follow-up patchset,
since the already-merged code also needs a good cleanup.

I'll do a more complete refactoring to get rid of the _is_compatible() stuff
in a second time, it needs much more work to handle correctly the 4 SoC families.

Neil

\
 
 \ /
  Last update: 2019-04-09 10:53    [W:0.097 / U:0.708 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site