lkml.org 
[lkml]   [2019]   [Apr]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v3 2/3] platform/x86: intel_pmc_core: Allow to dump debug registers on S0ix failure
On Mon, Apr 8, 2019 at 10:02 AM Andy Shevchenko
<andy.shevchenko@gmail.com> wrote:
>
> On Fri, Apr 5, 2019 at 11:36 PM Rajat Jain <rajatja@google.com> wrote:
> >
> > Add a module parameter which when enabled, will check on resume, if the
> > last S0ix attempt was successful. If not, the driver would warn and provide
> > helpful debug information (which gets latched during the failed suspend
> > attempt) to debug the S0ix failure.
> >
> > This information is very useful to debug S0ix failures. Specially since
> > the latched debug information will be lost (over-written) if the system
> > attempts to go into runtime (or imminent) S0ix again after that failed
> > suspend attempt.
>
> > +#ifdef CONFIG_PM_SLEEP
> > +
> > +static bool warn_on_s0ix_failures;
> > +module_param(warn_on_s0ix_failures, bool, 0644);
> > +MODULE_PARM_DESC(warn_on_s0ix_failures, "Check and warn for S0ix failures");
> > +
> > +static int pmc_core_suspend(struct device *dev)
> > +{
> > + struct pmc_dev *pmcdev = dev_get_drvdata(dev);
> > +
> > + /* Save PC10 and S0ix residency for checking later */
>
> > + if (warn_on_s0ix_failures && !pm_suspend_via_firmware() &&
> > + !rdmsrl_safe(MSR_PKG_C10_RESIDENCY, &pmcdev->pc10_counter) &&
> > + !pmc_core_dev_state_get(pmcdev, &pmcdev->s0ix_counter))
> > + pmcdev->check_counters = true;
>
> Perhaps something like
>
> pmcdev->check_counters = false;
> /* User doesn't want to be warned */
> if (!warn_on...)
> return 0;
> /* We do suspend via firmware */
> if (...)
> return 0;
> ...
>
> ?

I guess what you mean is one conditional per line. Sure, I will do that.

>
> > + else
> > + pmcdev->check_counters = false;
> > +
> > + return 0;
> > +}
> > +
> > +static inline bool pc10_failed(struct pmc_dev *pmcdev)
>
> To be or not to be? :-)
> Perhaps names of the functions should be
>
> pmc_code_is_pc10_failed()
>
> and so on

I think the suggestion is to use pmc_core_* as the function names. OK,
I will rename the functions to:

pmc_core_pc10_failed()
and
pmc_core_s0ix_failed()


>
> > +{
> > + u64 pc10_counter;
> > +
> > + if (!rdmsrl_safe(MSR_PKG_C10_RESIDENCY, &pc10_counter) &&
> > + pc10_counter == pmcdev->pc10_counter)
> > + return true;
>
> > + else
>
> Redundant.

OK, I'll remove the "else" part here.

>
> > + return false;
> > +}
> > +
> > +static inline bool s0ix_failed(struct pmc_dev *pmcdev)
> > +{
> > + u64 s0ix_counter;
> > +
> > + if (!pmc_core_dev_state_get(pmcdev, &s0ix_counter) &&
> > + s0ix_counter == pmcdev->s0ix_counter)
> > + return true;
>
> > + else
>
> Ditto.

OK, I'll remove the "else" part here.

>
> > + return false;
> > +}
> > +
> > +static int pmc_core_resume(struct device *dev)
> > +{
> > + struct pmc_dev *pmcdev = dev_get_drvdata(dev);
> > +
> > + if (!pmcdev->check_counters)
> > + return 0;
> > +
> > + if (pc10_failed(pmcdev)) {
> > + dev_info(dev, "PC10 entry had failed (PC10 cnt=0x%llx)\n",
> > + pmcdev->pc10_counter);
> > + } else if (s0ix_failed(pmcdev)) {
> > +
> > + const struct pmc_bit_map **maps = pmcdev->map->slps0_dbg_maps;
> > + const struct pmc_bit_map *map;
> > + int offset = pmcdev->map->slps0_dbg_offset;
> > + u32 data;
> > +
> > + dev_warn(dev, "S0ix entry had failed (S0ix cnt=%llu)\n",
> > + pmcdev->s0ix_counter);
> > + while (*maps) {
> > + map = *maps;
> > + data = pmc_core_reg_read(pmcdev, offset);
> > + offset += 4;
> > + while (map->name) {
> > + dev_warn(dev, "SLP_S0_DBG: %-32s\tState: %s\n",
> > + map->name,
> > + data & map->bit_mask ? "Yes" : "No");
> > + ++map;
> > + }
> > + ++maps;
> > + }
>
> Can't we utilize existing print helpers?

I didn't quite see any existing print helpers in this file. I took
this code from pmc_core_slps0_dbg_show(), and I think although I can
abstract out this code into a static function, the calling code need
to use seq_printf(s,...) and dev_warn(dev,...) respectively. - so
might be overkill (did not feel that the benefits were worth it).
Please let me know if you have any suggestions and will be happy to
use them.

Thanks,

Rajat


>
> > + }
> > + return 0;
> > +}
> > +
> > +#endif
>
> --
> With Best Regards,
> Andy Shevchenko

\
 
 \ /
  Last update: 2019-04-08 20:37    [W:0.151 / U:0.360 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site