lkml.org 
[lkml]   [2019]   [Apr]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH V2 19/20] DT bindings: spi: document tx/rx clock delay properties
    Date
    Tegra SPI controller has TX and RX trimmers to tuning the delay of
    SPI master clock with respect to the data.

    TX and RX tap values are based on the platform validation across the
    PVT and the trimmer values vary based on the trace lengths to the
    corresponding SPI devices.

    Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com>
    ---
    .../devicetree/bindings/spi/nvidia,tegra114-spi.txt | 20 ++++++++++++++++++++
    1 file changed, 20 insertions(+)

    diff --git a/Documentation/devicetree/bindings/spi/nvidia,tegra114-spi.txt b/Documentation/devicetree/bindings/spi/nvidia,tegra114-spi.txt
    index 9ba7c5a273b4..db8e0d71c5bc 100644
    --- a/Documentation/devicetree/bindings/spi/nvidia,tegra114-spi.txt
    +++ b/Documentation/devicetree/bindings/spi/nvidia,tegra114-spi.txt
    @@ -23,6 +23,18 @@ Required properties:
    Recommended properties:
    - spi-max-frequency: Definition as per
    Documentation/devicetree/bindings/spi/spi-bus.txt
    +Optional properties:
    +- nvidia,tx-clk-tap-delay: Delays the clock going out to the external device
    + with this tap value. This property is used to tune the outgoing data from
    + Tegra SPI master with respect to outgoing Tegra SPI master clock.
    + Tap values vary based on the platform design trace lengths from Tegra SPI
    + to corresponding slave devices. Valid tap values are from 0 thru 63.
    +- nvidia,rx-clk-tap-delay: Delays the clock coming in from the external device
    + with this tap value. This property is used to adjust the Tegra SPI master
    + clock with respect to the data from the SPI slave device.
    + Tap values vary based on the platform design trace lengths from Tegra SPI
    + to corresponding slave devices. Valid tap values are from 0 thru 63.
    +
    Example:

    spi@7000d600 {
    @@ -38,4 +50,12 @@ spi@7000d600 {
    reset-names = "spi";
    dmas = <&apbdma 16>, <&apbdma 16>;
    dma-names = "rx", "tx";
    + <spi-client>@<bus_num> {
    + ...
    + ...
    + nvidia,rx-clk-tap-delay = <0>;
    + nvidia,tx-clk-tap-delay = <16>;
    + ...
    + };
    +
    };
    --
    2.7.4
    \
     
     \ /
      Last update: 2019-04-05 02:15    [W:2.576 / U:0.004 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site