lkml.org 
[lkml]   [2019]   [Apr]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH 2/4] ARM: dts: omap4-droid4: Update backlight dt properties
* Jacek Anaszewski <jacek.anaszewski@gmail.com> [190404 20:12]:
> Tony,
>
> On 3/21/19 3:28 PM, Dan Murphy wrote:
> > Update the properties for the lm3532 device node for droid4.
> > With this change the backlight LED string and the keypad
> > LED strings will be controlled separately.
> >
> > Signed-off-by: Dan Murphy <dmurphy@ti.com>
> > ---
> >
> > v5 - No change - https://lore.kernel.org/patchwork/patch/1050409/
> >
> > v4 - No change - https://lore.kernel.org/patchwork/patch/1050125/
> > v3 - updated keypad label on v1 comment - https://lore.kernel.org/patchwork/patch/1049023/
> > v2 - Fixed ramp-up and ramp-down properties, removed hard coded property values,
> > I did not change the label as it is undecided what it could be - https://lore.kernel.org/patchwork/patch/1048806/
> >
> > arch/arm/boot/dts/omap4-droid4-xt894.dts | 26 ++++++++++++++++--------
> > 1 file changed, 18 insertions(+), 8 deletions(-)
> >
> > diff --git a/arch/arm/boot/dts/omap4-droid4-xt894.dts b/arch/arm/boot/dts/omap4-droid4-xt894.dts
> > index e21ec929f096..aea206f04f76 100644
> > --- a/arch/arm/boot/dts/omap4-droid4-xt894.dts
> > +++ b/arch/arm/boot/dts/omap4-droid4-xt894.dts
> > @@ -383,20 +383,30 @@
> > };
> > &i2c1 {
> > - lm3532@38 {
> > + led-controller@38 {
> > compatible = "ti,lm3532";
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > reg = <0x38>;
> > enable-gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>;
> > - lcd_backlight: backlight {
> > - compatible = "ti,lm3532-backlight";
> > + ramp-up-us = <1024>;
> > + ramp-down-us = <8193>;
> > - lcd {
> > - led-sources = <0 1 2>;
> > - ramp-up-msec = <1>;
> > - ramp-down-msec = <0>;
> > - };
>
> Since I'll be creating integration branch for this series,
> and it would be good to have this patch in it too, then
> I can do the amendments by myself:
>
> > + lcd_backlight: led@0 {
> > + reg = <0>;
> > + led-sources = <2>;
> > + ti,led-mode = <0>;
> > + label = "backlight";
>
> s/backlight/:backlight/
>
> > + linux,default-trigger = "backlight";
> > + };
> > +
> > + led@1 {
> > + reg = <1>;
> > + led-sources = <1>;
> > + ti,led-mode = <0>;
> > + label = "platform::kbd_backlight";
>
> s/platform::kbd_backlight/:kbd_backlight/

Yes makes sense to me.

> and then send you a pull request.
>
> Would you be OK with that?

Sure go for it. Here's my ack for the changes:

Acked-by: Tony Lindgren <tony@atomide.com>

And then for the one liner to fold in below:

Signed-off-by: Tony Lindgren <tony@atomide.com>

8< -------------
diff --git a/arch/arm/boot/dts/omap4-droid4-xt894.dts b/arch/arm/boot/dts/omap4-droid4-xt894.dts
--- a/arch/arm/boot/dts/omap4-droid4-xt894.dts
+++ b/arch/arm/boot/dts/omap4-droid4-xt894.dts
@@ -214,7 +214,6 @@

width-mm = <50>;
height-mm = <89>;
- backlight = <&lcd_backlight>;

panel-timing {
clock-frequency = <0>; /* Calculated by dsi */
\
 
 \ /
  Last update: 2019-04-05 00:02    [W:0.082 / U:0.052 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site