lkml.org 
[lkml]   [2019]   [Apr]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[RFC V2 08/11] dt-bindings: interconnect: add MT8183 interconnect dt-bindings
Date
Add interconnect provider dt-bindings for MT8183.

Signed-off-by: Henry Chen <henryc.chen@mediatek.com>
---
.../bindings/interconnect/mtk,mt8183.txt | 24 ++++++++++++++++++++++
1 file changed, 24 insertions(+)
create mode 100644 Documentation/devicetree/bindings/interconnect/mtk,mt8183.txt

diff --git a/Documentation/devicetree/bindings/interconnect/mtk,mt8183.txt b/Documentation/devicetree/bindings/interconnect/mtk,mt8183.txt
new file mode 100644
index 0000000..1cf1841
--- /dev/null
+++ b/Documentation/devicetree/bindings/interconnect/mtk,mt8183.txt
@@ -0,0 +1,24 @@
+Mediatek MT8183 interconnect binding
+
+MT8183 interconnect providers support dram bandwidth requirements. The provider
+is able to communicate with the DVFSRC and send the dram bandwidth to it.
+Provider nodes must reside within an DVFSRC device node.
+
+Required properties :
+- compatible : shall contain only one of the following:
+ "mediatek,mt8183-emi-icc"
+- #interconnect-cells : should contain 1
+
+Examples:
+
+dvfsrc@10012000 {
+ compatible = "mediatek,mt8183-dvfsrc";
+ reg = <0 0x10012000 0 0x1000>;
+ clocks = <&infracfg CLK_INFRA_DVFSRC>;
+ clock-names = "dvfsrc";
+ ddr_emi: interconnect {
+ compatible = "mediatek,mt8183-emi-icc";
+ #interconnect-cells = <1>;
+ };
+};
+
--
1.9.1
\
 
 \ /
  Last update: 2019-04-30 11:46    [W:0.125 / U:0.028 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site