lkml.org 
[lkml]   [2019]   [Apr]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH 0/5] ARM: rskrza1: Add RZ/A1 IRQC and input switches
Date
Hi Geert,

Thanks for this patch!

I've been hacking this support into the standard GIC driver in our BSPs
for years now. :o

On Mon, Apr 29, 2019, Geert Uytterhoeven wrote:
> I expect this driver to be reusable for RZ/A2, after adding a match
> entry with .gic_spi_base = 4.

Yes, the same IP block is in RZ/A2.

So with that said, should we call this driver irq-renesas-rza1.c or just
irq-renesas-rza.c?
It doesn't really matter to me.
For an RZ/A3, we might just use the same IP again.

Side note, I've seen this interrupt pin HW in some older SH4A devices
(like SH7724 and SH7757). So it's been around for a while.


Chris

\
 
 \ /
  Last update: 2019-04-29 14:23    [W:0.080 / U:0.072 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site