lkml.org 
[lkml]   [2019]   [Apr]   [29]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v3 2/3] power: supply: Add driver for Microchip UCS1002
On Mon, Apr 29, 2019 at 1:36 PM Guenter Roeck <linux@roeck-us.net> wrote:
>
> On Mon, Apr 29, 2019 at 12:53:48PM -0700, Andrey Smirnov wrote:
> > Add driver for Microchip UCS1002 Programmable USB Port Power
> > Controller with Charger Emulation. The driver exposed a power supply
> > device to control/monitor various parameter of the device as well as a
> > regulator to allow controlling VBUS line.
> >
> > Signed-off-by: Enric Balletbo Serra <enric.balletbo@collabora.com>
> > Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
> > Cc: Chris Healy <cphealy@gmail.com>
> > Cc: Lucas Stach <l.stach@pengutronix.de>
> > Cc: Fabio Estevam <fabio.estevam@nxp.com>
> > Cc: Guenter Roeck <linux@roeck-us.net>
> > Cc: Sebastian Reichel <sre@kernel.org>
> > Cc: linux-kernel@vger.kernel.org
> > Cc: linux-pm@vger.kernel.org
> > ---
> > drivers/power/supply/Kconfig | 9 +
> > drivers/power/supply/Makefile | 1 +
> > drivers/power/supply/ucs1002_power.c | 646 +++++++++++++++++++++++++++
> > 3 files changed, 656 insertions(+)
> > create mode 100644 drivers/power/supply/ucs1002_power.c
> >
> > diff --git a/drivers/power/supply/Kconfig b/drivers/power/supply/Kconfig
> > index e901b9879e7e..c614c8a196f3 100644
> > --- a/drivers/power/supply/Kconfig
> > +++ b/drivers/power/supply/Kconfig
> > @@ -660,4 +660,13 @@ config FUEL_GAUGE_SC27XX
> > Say Y here to enable support for fuel gauge with SC27XX
> > PMIC chips.
> >
> > +config CHARGER_UCS1002
> > + tristate "Microchip UCS1002 USB Port Power Controller"
> > + depends on I2C
> > + depends on OF
> > + select REGMAP_I2C
> > + help
> > + Say Y to enable support for Microchip UCS1002 Programmable
> > + USB Port Power Controller with Charger Emulation.
> > +
> > endif # POWER_SUPPLY
> > diff --git a/drivers/power/supply/Makefile b/drivers/power/supply/Makefile
> > index b731c2a9b695..c56803a9e4fe 100644
> > --- a/drivers/power/supply/Makefile
> > +++ b/drivers/power/supply/Makefile
> > @@ -87,3 +87,4 @@ obj-$(CONFIG_AXP288_CHARGER) += axp288_charger.o
> > obj-$(CONFIG_CHARGER_CROS_USBPD) += cros_usbpd-charger.o
> > obj-$(CONFIG_CHARGER_SC2731) += sc2731_charger.o
> > obj-$(CONFIG_FUEL_GAUGE_SC27XX) += sc27xx_fuel_gauge.o
> > +obj-$(CONFIG_CHARGER_UCS1002) += ucs1002_power.o
> > diff --git a/drivers/power/supply/ucs1002_power.c b/drivers/power/supply/ucs1002_power.c
> > new file mode 100644
> > index 000000000000..677f20a4d76f
> > --- /dev/null
> > +++ b/drivers/power/supply/ucs1002_power.c
> > @@ -0,0 +1,646 @@
> ...
> > +
> > +static enum power_supply_usb_type ucs1002_usb_types[] = {
> > + POWER_SUPPLY_USB_TYPE_PD,
> > + POWER_SUPPLY_USB_TYPE_SDP,
> > + POWER_SUPPLY_USB_TYPE_DCP,
> > + POWER_SUPPLY_USB_TYPE_CDP,
> > + POWER_SUPPLY_USB_TYPE_UNKNOWN,
> > +};
> > +
> > +static int ucs1002_set_usb_type(struct ucs1002_info *info, int val)
> > +{
> > + unsigned int mode;
> > +
> > + if (val >= ARRAY_SIZE(ucs1002_usb_types))
> > + return -EINVAL;
> > +
> I hate to bring it up that late, but I don't see a check
> against val being negative anywhere in the calling code.
>

Sure, I'll add it in v4

Thanks,
Andrey Smirnov

\
 
 \ /
  Last update: 2019-04-30 03:17    [W:0.046 / U:0.160 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site