lkml.org 
[lkml]   [2019]   [Apr]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH] arm64: dts: qcom: sdm845-mtp: Make USB1 peripheral
On Fri, Apr 26, 2019 at 1:10 PM Bjorn Andersson
<bjorn.andersson@linaro.org> wrote:
>
> The MTP is a "mobile reference device", as such the default operation is
> to use fastboot to boot/flash software onto it and the common case is
> thereby that we boot with a USB cable connected downstream from a PC or
> a hub. And without support for the PMI8998 charger block VBUS will not
> be driven by the device.
>
> Switch to peripheral until we can enable OTG.
>
> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Makes sense to me.

Reviewed-by: Jeffrey Hugo <jeffrey.l.hugo@gmail.com>

> ---
> arch/arm64/boot/dts/qcom/sdm845-mtp.dts | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
> index 02b8357c8ce8..2e78638eb73b 100644
> --- a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
> +++ b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
> @@ -404,8 +404,8 @@
> };
>
> &usb_1_dwc3 {
> - /* Until we have Type C hooked up we'll force this as host. */
> - dr_mode = "host";
> + /* Until we have Type C hooked up we'll force this as peripheral. */
> + dr_mode = "peripheral";
> };
>
> &usb_1_hsphy {
> --
> 2.18.0
>

\
 
 \ /
  Last update: 2019-04-26 21:27    [W:0.065 / U:0.180 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site