lkml.org 
[lkml]   [2019]   [Apr]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3] pinctrl:intel: Retain HOSTSW_OWN for requested gpio pin
On Tue, Apr 23, 2019 at 12:38:17PM +0200, Linus Walleij wrote:
> On Mon, Apr 15, 2019 at 7:54 AM Chris Chiu <chiu@endlessm.com> wrote:
>
> > The touchpad of the ASUS laptops E403NA, X540NA, X541NA are not
> > responsive after suspend/resume. The following error message
> > shows after resume.
> > i2c_hid i2c-ELAN1200:00: failed to reset device.
> >
> > On these laptops, the touchpad interrupt is connected via a GPIO
> > pin which is controlled by Intel pinctrl. After system resumes,
> > the GPIO is in ACPI mode and no longer works as an IRQ.
> >
> > This commit saves the HOSTSW_OWN value during suspend, make sure
> > the HOSTSW_OWN mode remains the same after resume.
> >
> > Signed-off-by: Chris Chiu <chiu@endlessm.com>
>
> This v3 patch applied with Mika's ACK.

Hmm... It's supposed to go along with our PR.

--
With Best Regards,
Andy Shevchenko


\
 
 \ /
  Last update: 2019-04-26 14:51    [W:0.066 / U:0.072 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site