lkml.org 
[lkml]   [2019]   [Apr]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[RFC PATCH 1/4] dt-bindings: input: Add support for the MPR121 without interrupt line
Date
Normally, the MPR121 controller uses separate interrupt line to notify
the I2C host that a key was touched/released. To support platforms that
can not use the interrupt line, polling of the MPR121 registers can be
used.

Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com>
---
.../bindings/input/mpr121-touchkey-polled.txt | 26 ++++++++++++++++++++++
1 file changed, 26 insertions(+)
create mode 100644 Documentation/devicetree/bindings/input/mpr121-touchkey-polled.txt

diff --git a/Documentation/devicetree/bindings/input/mpr121-touchkey-polled.txt b/Documentation/devicetree/bindings/input/mpr121-touchkey-polled.txt
new file mode 100644
index 000000000000..6bb1d312614c
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/mpr121-touchkey-polled.txt
@@ -0,0 +1,26 @@
+* Freescale MPR121 Controller without interrupt line
+
+Required Properties:
+- compatible: Should be "fsl,mpr121-touchkey-polled"
+- reg: The I2C slave address of the device.
+- vdd-supply: Phandle to the Vdd power supply.
+- linux,keycodes: Specifies an array of numeric keycode values to
+ be used for reporting button presses. The array can
+ contain up to 12 entries.
+
+Optional Properties:
+- autorepeat: Enable autorepeat feature.
+
+Example:
+
+#include "dt-bindings/input/input.h"
+
+ touchkeys: keys@5a {
+ compatible = "fsl,mpr121-touchkey-polled";
+ reg = <0x5a>;
+ autorepeat;
+ vdd-supply = <&ldo4_reg>;
+ linux,keycodes = <KEY_0>, <KEY_1>, <KEY_2>, <KEY_3>,
+ <KEY_4> <KEY_5>, <KEY_6>, <KEY_7>,
+ <KEY_8>, <KEY_9>, <KEY_A>, <KEY_B>;
+ };
--
2.1.4
\
 
 \ /
  Last update: 2019-04-26 10:32    [W:0.046 / U:3.632 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site