lkml.org 
[lkml]   [2019]   [Apr]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [RFC PATCH v3 net-next 06/11] dt-bindings: net: ti: add new cpsw switch driver bindings
From
Date


On 26.04.19 01:40, Andrew Lunn wrote:
>> +Required Sub-nodes:
>> +- ports : contains CPSW external ports descriptions
>> + Required properties:
>> + - #address-cells : Must be 1
>> + - #size-cells : Must be 0
>> + - reg : CPSW port number. Should be 1 or 2
>> + - phys : phandle on phy-gmii-sel PHY (see phy/ti-phy-gmii-sel.txt)
>> + - phy-mode : operation mode of the PHY interface [1]
>> + - phy-handle : phandle to a PHY on an MDIO bus [1]
>
>
>> + cpsw_port1: port@1 {
>> + reg = <1>;
>> + ti,label = "port1";
>> + /* Filled in by U-Boot */
>> + mac-address = [ 00 00 00 00 00 00 ];
>> + phys = <&phy_gmii_sel 1>;
>
> Hi Grygorii
>
> phy-mode and phy-handle are required, but missing from your example.
>
> Otherwise, this looks like a reasonable binding.

Yea. they configured in board files - will add.

Thanks.

--
Best regards,
grygorii

\
 
 \ /
  Last update: 2019-04-26 09:50    [W:0.049 / U:0.072 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site