lkml.org 
[lkml]   [2019]   [Apr]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] net: phy: realtek: Add rtl8211e rx/tx delays config
On Fri, Apr 26, 2019 at 10:05:21PM +0200, Andrew Lunn wrote:
> > Hello Andrew
> >
> > Thanks for the comment. I'll alter the code the way you said. The mode will
> > be changed by the config_init-function only if the interface is selected to be
> > rgmii-like (rgmii, rgmii-id, rgmii-txid and rgmii-rxid), otherwise it will
> > be left as is.
> >
> > But I've got a question regarding this then. What about for instance rtl8211f
> > phy config_init-method? It setups the delay config in any case, no matter
> > whether interface is configured to be of rgmii or another mode. Is it correct
> > to configure rtl8211e and rtl8211f differently? Especially seeing the U-boot
> > driver also perform the rtl8211f phy configuration.
>
> Hi Sergey
>
> It is not correct and rtl8211f should be changed. Please add a second
> patch for that.
>
> We got burnt recently with PHY drivers doing the wrong thing with
> respect to RGMII delays. We have learnt from that experience, but
> there is code in the kernel which still does things wrong.
>
> Andrew

Ok. I'll send the updated patchset with rtl8211f_config_init fixed soon.

-Sergey

\
 
 \ /
  Last update: 2019-04-26 22:29    [W:0.086 / U:0.120 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site