Messages in this thread | | | From | "Ong, Boon Leong" <> | Subject | RE: [PATCH 4/7] net: stmmac: introducing support for DWC xPCS logics | Date | Thu, 25 Apr 2019 06:51:47 +0000 |
| |
>-----Original Message----- >From: Andrew Lunn [mailto:andrew@lunn.ch] >Sent: Thursday, April 25, 2019 11:21 AM >To: Ong, Boon Leong <boon.leong.ong@intel.com> >Cc: David S. Miller <davem@davemloft.net>; netdev@vger.kernel.org; linux- >kernel@vger.kernel.org; Kweh, Hock Leong <hock.leong.kweh@intel.com>; >Voon, Weifeng <weifeng.voon@intel.com> >Subject: Re: [PATCH 4/7] net: stmmac: introducing support for DWC xPCS >logics > >> >> +/* MII MMD AN Status defines for C37 AN SGMII Status */ >> >> +#define AN_STAT_C37_AN_CMPLT BIT(0) /* AN >Complete Intr */ >> >> +#define AN_STAT_C37_AN_FD BIT(1) /* Full Duplex */ >> >> +#define AN_STAT_C37_AN_SPEED_SHIFT 2 /* AN Speed shift */ >> >> +#define AN_STAT_C37_AN_SPEED GENMASK(3, 2) /* AN >Speed */ >> >> +#define AN_STAT_C37_AN_10MBPS 0x0 /* 10 Mbps */ >> >> +#define AN_STAT_C37_AN_100MBPS 0x1 /* 100 Mbps >> >*/ >> >> +#define AN_STAT_C37_AN_1000MBPS 0x2 /* 1000 Mbps >> >*/ >> >> +#define AN_STAT_C37_AN_LNKSTS BIT(4) /* Link Status >*/ >> > >> >Is these are standardized, not proprietary, consider adding them to >> >include/uapi/linux/mii.h so similar. >> >> Yeah, it does look very standardized. However, per DW spec, they are >> vendor-specific register set which uses MDIO_MMD_VEND2 to access. > >Maybe you can go get the 802.3 standard and check section 37. If these >registers are the same, they could still be placed in mii.h. What MMD >you use is a different matter. > I cross-checked on 802.3 section 37.2.5.1 Management registers, the spec only talks about BMSR and extended status. I also checked on 802.3 section 45.2 MDIO interface registers, section 45.2.7 AN registers, section 45.2.9 & 45.2.10 Vendor specific MMD1 & MMD2, there are no field format that matches the above bit fields. So, it should be reasonable to park these #defines in this local file for now.
Thanks. Boon Leong
| |