lkml.org 
[lkml]   [2019]   [Apr]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH RESEND] regulator: max77620: Fix regulator info setting for max20024
From
Date
22.04.2019 14:39, Dmitry Osipenko пишет:
> 22.04.2019 8:35, Axel Lin пишет:
>> Current code always set pmic->rinfo[id] = &max77620_regs_info[id];
>> It should set to either max77620_regs_info or max20024_regs_info
>> depends on the chip_id.
>>
>> Signed-off-by: Axel Lin <axel.lin@ingics.com>
>> ---
>> This was sent on https://lkml.org/lkml/2019/2/23/482
>>
>> drivers/regulator/max77620-regulator.c | 2 +-
>> 1 file changed, 1 insertion(+), 1 deletion(-)
>>
>> diff --git a/drivers/regulator/max77620-regulator.c b/drivers/regulator/max77620-regulator.c
>> index 1607ac673e44..0ad91a7f9cb9 100644
>> --- a/drivers/regulator/max77620-regulator.c
>> +++ b/drivers/regulator/max77620-regulator.c
>> @@ -803,7 +803,7 @@ static int max77620_regulator_probe(struct platform_device *pdev)
>> continue;
>>
>> rdesc = &rinfo[id].desc;
>> - pmic->rinfo[id] = &max77620_regs_info[id];
>> + pmic->rinfo[id] = &rinfo[id];
>> pmic->enable_power_mode[id] = MAX77620_POWER_MODE_NORMAL;
>> pmic->reg_pdata[id].active_fps_src = -1;
>> pmic->reg_pdata[id].active_fps_pd_slot = -1;
>>
>
> That is a quite difficult bug to spot because the regulator parameters are mostly identical and the part that differs is usually unused in practice, good catch! Thank you very much!
>
> Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
> Tested-by: Dmitry Osipenko <digetx@gmail.com>
>

Axel, please also add a stable tag to the commit message to get the fix backported.

Cc: stable <stable@vger.kernel.org>

\
 
 \ /
  Last update: 2019-04-22 13:45    [W:0.043 / U:1.804 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site